On Fri, Dec 03, 2004 at 10:35:17AM -0800, Roland Dreier wrote: > Can you try with the very latest svn bits?
How can I tell which bits I'm currently testing? I did the "svn up" about 2h ago. svn is now telling me: [EMAIL PROTECTED]:/usr/src/linux-ia64-release-2.6.10/drivers/infiniband$ svn up At revision 1311. [EMAIL PROTECTED]:/usr/src/linux-ia64-release-2.6.10/drivers/infiniband$ > It turns out there the > readb() I was using in the FW command code path is not allowed by > Mellanox HW -- all accesses need to be 32 bits wide. I have no idea > if it could cause this problem but in the latest tree I converted it > to a readl() just to be safe. ok. > By the way, what's the difference between this box and the one that > was working before? Just OpenIB SW version? Before we were using the original HP firmware that exposes the virtual bridge but hides the "3rd BAR". I will eventually go back and try with such a card again. But I think being able to use a reflashed card would be just as important for openib.org than using the original HP card. thanks, grant _______________________________________________ openib-general mailing list [EMAIL PROTECTED] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
