Hi,
I have tried the kernel 2.6.11 drivers on an x86-64 machine with a
MT23108 card. The driver loads ok after
$ modprobe ib_mthca; modprobe ib_umad
Since I use devfs, I have to manually create
$ mknod /dev/infiniband/umad0 c 231 0
$ mknod /dev/infiniband/umad1 c 231 1
$ mknod /dev/infiniband/issm0 c 231 64
$ mknod /dev/infiniband/issm1 c 231 65
I get
$ /usr/local/ib/bin/ibstat
CA 'mthca0'
CA type: MT23108
Number of ports: 2
Firmware version: 3.2.0
Hardware version: a1
Node GUID: 0x000000008815bcaa
System image GUID: 0x000000008815bcaa
Port 1:
State: Initializing
Physical state: LinkUp
Rate: 10
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x00500a68
Port GUID: 0x0000000000000000
Port 2:
State: Down
Physical state: Polling
Rate: 2
Base lid: 0
LMC: 0
SM lid: 0
Capability mask: 0x00500a68
Port GUID: 0x0000000000000000
which already looks strange (GUID 0 ???). Running opensm then doesn't
activate the ports:
Apr 05 19:18:25 [4000] -> OpenSM Rev:openib-1.0.0
Apr 05 19:18:25 [4000] -> osm_opensm_init: Forcing single threaded dispatcher.
Apr 05 19:18:25 [4000] -> osm_report_notice: Reporting Generic Notice type:3
num:66 from LID:0x0000 GID:0x0000000030f2ffff,0x0000000000000000
Apr 05 19:18:25 [4000] -> osm_report_notice: Reporting Generic Notice type:3
num:66 from LID:0x0000 GID:0x0000000030f2ffff,0x0000000000000000
Apr 05 19:18:25 [4000] -> osm_vendor_get_all_port_attr: assign CA
0x7fffffffd010ort 1 guid (0x65babaa) as the default port.
Apr 05 19:18:25 [4000] -> osm_vendor_bind: Binding to port 0x225dabaa.
Apr 05 19:18:25 [4000] -> osm_vendor_bind: Binding to port 0x8000000.
Apr 05 19:18:25 [2400A] -> umad_receiver: Failed to obtain request madw for
received MAD(method=81 attr=11) -- dropping.
What could have gone wrong?
Roland
_______________________________________________
openib-general mailing list
openib-general@openib.org
http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
