>>>>> "Hal" == Hal Rosenstock <[EMAIL PROTECTED]> writes:
Hal> On Tue, 2005-04-05 at 13:26, Roland Fehrenbacher wrote:
>> I have tried the kernel 2.6.11 drivers on an x86-64 machine
>> with a MT23108 card. The driver loads ok after
>> $ modprobe ib_mthca; modprobe ib_umad
>> Since I use devfs, I have to manually create
>> $ mknod /dev/infiniband/umad0 c 231 0
>> $ mknod /dev/infiniband/umad1 c 231 1
>> $ mknod /dev/infiniband/issm0 c 231 64
>> $ mknod /dev/infiniband/issm1 c 231 65
Hal> What are the permissions on those ? Are they crw ?
$ ls -l /dev/infiniband
total 0
crw-r--r-- 1 root root 231, 64 Apr 5 18:53 issm0
crw-r--r-- 1 root root 231, 65 Apr 5 18:54 issm1
crw-r--r-- 1 root root 231, 0 Apr 5 18:52 umad0
crw-r--r-- 1 root root 231, 1 Apr 5 18:54 umad1
>> I get
>>
>> $ /usr/local/ib/bin/ibstat
>> CA 'mthca0'
>> CA type: MT23108
>> Number of ports: 2
>> Firmware version: 3.2.0
>> Hardware version: a1
>> Node GUID: 0x000000008815bcaa
>> System image GUID: 0x000000008815bcaa
>> Port 1:
>> State: Initializing
>> Physical state: LinkUp
>> Rate: 10
>> Base lid: 0
>> LMC: 0
>> SM lid: 0
>> Capability mask: 0x00500a68
>> Port GUID: 0x0000000000000000
>> Port 2:
>> State: Down
>> Physical state: Polling
>> Rate: 2
>> Base lid: 0
>> LMC: 0
>> SM lid: 0
>> Capability mask: 0x00500a68
>> Port GUID: 0x0000000000000000
>>
>> which already looks strange (GUID 0 ???).
Hal> It looks like the port GUIDs are not set in NVRAM.
They seem to be shown alright with ibstatus (or isn't gid = GUID?):
$ /usr/local/ib/bin/ibstatus
Infiniband device 'mthca0' port 1 status:
default gid: fe80:0000:0000:0000:0002:c902:0000:771d
base lid: 0x0
sm lid: 0x0
state: 2: INIT
phys state: 5: LinkUp
rate: 10 Gb/sec (4X)
Infiniband device 'mthca0' port 2 status:
default gid: fe80:0000:0000:0000:0002:c902:0000:771e
base lid: 0x0
sm lid: 0x0
state: 1: DOWN
phys state: 2: Polling
rate: 2.5 Gb/sec (1X)
> Running opensm then doesn't activate the ports:
>
> Apr 05 19:18:25 [4000] -> OpenSM Rev:openib-1.0.0
> Apr 05 19:18:25 [4000] -> osm_opensm_init: Forcing single threaded dispatcher.
> Apr 05 19:18:25 [4000] -> osm_report_notice: Reporting Generic Notice type:3
> num:66 from LID:0x0000 GID:0x0000000030f2ffff,0x0000000000000000
> Apr 05 19:18:25 [4000] -> osm_report_notice: Reporting Generic Notice type:3
> num:66 from LID:0x0000 GID:0x0000000030f2ffff,0x0000000000000000
> Apr 05 19:18:25 [4000] -> osm_vendor_get_all_port_attr: assign CA
> 0x7fffffffd010ort 1 guid (0x65babaa) as the default port.
Hal> I see a bug in this message. I will fix it. Please sync
Hal> OpenSM to at least version 2111 and rerun.
I will recompile tomorrow, and try a firmware upgrade.
Roland
_______________________________________________
openib-general mailing list
openib-general@openib.org
http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
