Michael,
> > > Which FW revision do you have?
> > >
> > The "ibstat" command shows:
> >
> > CA type: MT25204
> > Number of ports: 1
> > Firmware version: 1.0.800
> > Hardware version: a0
> > Node GUID: 0x0002c90200216dc4
> > System image GUID: 0x0002c90200216dc7
> >
> > -Don Albert-
> >
>
> Yes, that's the latest revision. Hmm.
>
What about the other thing I mentioned in my first message: the "lspci" command complains about the board slot that the HCA is plugged into:
pcilib: Resource 2 in /sys/bus/pci/devices/0000:03:00.0/resource has a 64-bit address, ignoring
....
03:00.0 InfiniBand: Mellanox Technologies MT25204 [InfiniHost III Lx HCA] (rev 20)
I also found out that on this machine the HCA is plugged into a 16X PCI-e slot, which is different than the other machine which is working, where the slot is 8X.
Bear in mind, however, that both machines were previously working with the 2.6.9-34 kernel with the backport patches and the OpenIB svn 6500 code. Did something happen in 2.6.16, or am I missing a patch?
-Don Albert-
_______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
