Sorry attached the wrong server log. Here are the new logs. --Sundeep.
On Thu, 20 Jul 2006, Sundeep Narravula wrote: > Steve, > > > > Please build the iw_cxgb3 driver with debug on and send me > > > the /var/log/messages snipits after running rping. That'll help me > > > figure out what's up... > > I have attached the logs on the server side and the client side. > > Thanks, > --Sundeep. > > > > > I will try this and get back. > > > > Thanks, > > --Sundeep. > > > > > > > > Steve. > > > > > > > > > > > > On Thu, 2006-07-20 at 03:05 -0400, Sundeep Narravula wrote: > > > > Hi, > > > > > > > > > What does your network configuration look like? IE send ifconfig > > > > > output > > > > > on both systems. > > > > > Send the output of lsmod on both systems. > > > > > > > > I have attached both these for both the systems. > > > > > > > > > Does krping work? > > > > > > > > No. It fails with the same error. > > > > > > > > > Can you ssh between the 2 systems using the T3 ip addresses? > > > > > > > > No. > > > > > > > > > Do the following libs exist in /usr/local/lib: > > > > > libibverbs.* > > > > > librmdacm.* > > > > > > > > These exist. > > > > > > > > > libcxgb3.* > > > > > > > > This is not in /usr/local/lib. > > > > /usr/local/lib/infiniband/cxgb3.* exist though. > > > > > > > > > Do ldconfig -v and make sure libibverbs is only found in > > > > > /usr/local/lib. > > > > > If you have OFED or some other rpm package with libibverbs installed, > > > > > you'll have problems. > > > > > > > > Checked this. Only one exists. > > > > > > > > > For some reason it looks to be trying to load the MTHCA Infiniband > > > > > library. Do you have IB cards in the system? > > > > > > > > Yes. We do have IB nics on the system. > > > > > > > > --Sundeep. > > > > > > > > > > > > > > Steve. > > > > > > > > > > > > > > > On Wed, 2006-07-19 at 13:28 -0400, Sundeep Narravula wrote: > > > > > > Hi, > > > > > > > > > > > > We are using kernel 2.6.16.3 and installed the latest code/drivers > > > > > > from > > > > > > the iwarp branch. Currently, we are seeing an address resolution > > > > > > problem > > > > > > while using rping. > > > > > > > > > > > > [EMAIL PROTECTED] examples]$ ./rping -c -VvC100 -a 150.10.11.200 -p > > > > > > 9999 > > > > > > libibverbs: Warning: couldn't load driver > > > > > > /usr/local/lib/infiniband/mthca.so: > > > > > > /usr/local/lib/infiniband/mthca.so: > > > > > > undefined symbol: ibv_cmd_query_pkey > > > > > > cma event 1, error -110 > > > > > > > > > > > > The server hangs and cannot be killed. > > > > > > > > > > > > Both the nodes are connected to the switch and I am able to ping > > > > > > the local > > > > > > ip addresses. Is there anything we are missing? > > > > > > > > > > > > Thanks, > > > > > > --Sundeep. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > openib-general mailing list > > > > > > [email protected] > > > > > > http://openib.org/mailman/listinfo/openib-general > > > > > > > > > > > > To unsubscribe, please visit > > > > > > http://openib.org/mailman/listinfo/openib-general > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > openib-general mailing list > > [email protected] > > http://openib.org/mailman/listinfo/openib-general > > > > To unsubscribe, please visit > > http://openib.org/mailman/listinfo/openib-general > > > >
cxio: opening rnic dev cxgb3c0 cxio: rnic cxgb3c0 info: tpt_base=0xa000000 tpt_top=0xbffffff pbl_base=0xe000000 pbl_top=0xfffffff rqt_base=0xc000000, rqt_top=0xdffffff cxio: udbell_len=0x8000000 udbell_physbase=0xf0000000 kdb_addr=f8852004 cxio: CtrlQP dma_addr=0x339a0000 kaddr=f39a0000 size=1024 iw_ch:open_rnic_init line 74 iw_ch:iwch_register_device line 983 iw_ch: dev name = cxgb3_%d iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_pkey:840 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_gid:850 iw_ch:ibdev c26adc00, port 1, index 0, gid f5e15804 iw_ch:dev c26adc00 port 1 netdev f7f50000 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_pkey:840 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_gid:850 iw_ch:ibdev c26adc00, port 2, index 0, gid f5e157c4 iw_ch:dev c26adc00 port 2 netdev f7011800 iw_ch:iwch_register_device line 1069 iw_ch:iwch_register_device line 1077 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_board:961 dev = 0xc26adc00 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_hca:952 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_fw_ver:940 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_rev:928 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_device:867 ADDRCONF(NETDEV_UP): eth3: link is not ready ADDRCONF(NETDEV_UP): eth2: link is not ready eth2: link up, 10Gbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready eth2: no IPv6 routers present iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_alloc_ucontext:114 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_device:867 iw_ch:iwch_create_listen (drivers/infiniband/hw/cxgb3/iwch_cm.c line 1944) iw_ch:get_port enter (drivers/infiniband/hw/cxgb3/iwch_cm.c line 148) inp port 9999 iw_ch:get_port alloc port 9999 iw_ch:alloc_ep enter (drivers/infiniband/hw/cxgb3/iwch_cm.c line 290) iw_ch:alloc ep f5e10140 iw_ch: state_set - idle -> listen iw_ch:listen_start enter (drivers/infiniband/hw/cxgb3/iwch_cm.c line 1225)
iw_ch:open_rnic_toe line 140 cxio: opening rnic dev cxgb3c0 cxio: rnic cxgb3c0 info: tpt_base=0xa000000 tpt_top=0xbffffff pbl_base=0xe000000 pbl_top=0xfffffff rqt_base=0xc000000, rqt_top=0xdffffff cxio: udbell_len=0x8000000 udbell_physbase=0xf0000000 kdb_addr=f8852004 cxio: CtrlQP dma_addr=0x339a0000 kaddr=f39a0000 size=1024 iw_ch:open_rnic_init line 74 iw_ch:iwch_register_device line 983 iw_ch: dev name = cxgb3_%d iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_pkey:840 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_gid:850 iw_ch:ibdev f682d400, port 1, index 0, gid f3cb4764 iw_ch:dev f682d400 port 1 netdev f7f50000 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_port:897 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_pkey:840 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_gid:850 iw_ch:ibdev f682d400, port 2, index 0, gid f3cb4724 iw_ch:dev f682d400 port 2 netdev f77e4000 iw_ch:iwch_register_device line 1069 iw_ch:iwch_register_device line 1077 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_board:961 dev = 0xf682d400 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_hca:952 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_fw_ver:940 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:show_rev:928 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_device:867 ADDRCONF(NETDEV_UP): eth2: link is not ready eth2: link up, 10Gbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready ADDRCONF(NETDEV_UP): eth3: link is not ready eth2: no IPv6 routers present iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_alloc_ucontext:114 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_query_device:867 iw_ch:drivers/infiniband/hw/cxgb3/iwch_provider.c:iwch_dealloc_ucontext:104
_______________________________________________ openib-general mailing list [email protected] http://openib.org/mailman/listinfo/openib-general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
