Quoting r. Roland Dreier <[EMAIL PROTECTED]>:
> Subject: Re: Ordering between PCI config space writes and MMIO reads?
>
> The discussion fizzled out without really reaching a definitive
> answer, so I'm going to apply the original patch (below), since I
> pretty much convinced myself that only the driver doing the config
> access has enough information to fix this reliably.
>
> - R.
>
> Author: John Partridge <[EMAIL PROTECTED]>
> Date: Tue Oct 31 11:00:04 2006 -0800
>
> IB/mthca: Make sure all PCI config writes reach device before doing MMIO
>
> During initialization, mthca writes some PCI config space registers
> and then does an MMIO read from one of the BARs it just enabled. This
> MMIO read sometimes failed and caused a crash on SGI Altix machines,
> because the PCI-X host bridge (legitimately, according to the PCI
> spec) allowed the MMIO read to start before the config write completed.
>
> To fix this, add a config read after all config writes to make sure
> they are all done before starting the MMIO read.
>
> Signed-off-by: John Partridge <[EMAIL PROTECTED]>
> Signed-off-by: Roland Dreier <[EMAIL PROTECTED]>
>
> diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c
> b/drivers/infiniband/hw/mthca/mthca_reset.c
> index 91934f2..578dc7c 100644
> --- a/drivers/infiniband/hw/mthca/mthca_reset.c
> +++ b/drivers/infiniband/hw/mthca/mthca_reset.c
> @@ -281,6 +281,20 @@ good:
> goto out;
> }
>
> + /*
> + * Perform a "flush" of the PCI config writes here by reading
> + * the PCI_COMMAND register. This is needed to make sure that
> + * we don't try to touch other PCI BARs before the config
> + * writes are done -- otherwise an MMIO cycle could start
> + * before the config writes are done and reach the HCA before
> + * the BAR is actually enabled.
> + */
> + if (pci_read_config_dword(mdev->pdev, PCI_COMMAND, hca_header)) {
> + err = -ENODEV;
> + mthca_err(mdev, "Couldn't access HCA memory after restoring, "
> + "aborting.\n");
> + }
> +
> out:
> if (bridge)
> pci_dev_put(bridge);
Here's what I don't understand: according to PCI rules, pci config read
can bypass pci config write (both are non-posted).
So why does doing it help flush the writes as the comment claims?
Isn't this more the case of
/* pci_config_write seems to complete asynchronously on Altix systems.
* This is probably broken but its not clear what's the best
* thing to do is - for now, do pci_read_config_dword which seems to flush
* everything out. */
--
MST
_______________________________________________
openib-general mailing list
[email protected]
http://openib.org/mailman/listinfo/openib-general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
