It should be /dev/cua? Here is what I get with Hipster 17.10. First is with a Triplite Keyscan connected. Second is with it removed. Not sure what the deal is with the cua0 and cua1 entries. But I seem to recall trying to get a PCI serial port card to work and giving up.
Be aware that very few USB to RS232 devices work with Solaris, And in general it is a horrible can of worms even when they do. My canonical test for a new admin at work was to mention "modem". If the person flinched I knew they were experienced. If they didn't they were clearly new at this. rhb@Hipster:/dev$ ls -l /dev/cua* lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua0 -> ../devices/pci@0,0/isa@1/asy@1,3f8:a,cu lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua1 -> ../devices/pci@0,0/isa@1/asy@1,2f8:b,cu /dev/cua: total 1 lrwxrwxrwx 1 root root 53 Apr 29 10:43 0 -> ../../devices/pci@0,0/pci103c,1309@1a,2/device@1:0,cu rhb@Hipster:/dev$ ls -l /dev/cua* lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua0 -> ../devices/pci@0,0/isa@1/asy@1,3f8:a,cu lrwxrwxrwx 1 root root 39 Dec 19 19:52 /dev/cua1 -> ../devices/pci@0,0/isa@1/asy@1,2f8:b,cu rhb@Hipster:/dev$ -------------------------------------------- On Sun, 4/29/18, Till Wegmüller <toaster...@gmail.com> wrote: Subject: [OpenIndiana-discuss] Connecting Serial Modem to Illumos (ACM9 To: openindiana-discuss@openindiana.org Date: Sunday, April 29, 2018, 6:56 AM Hello Dear OI Community I am trying to connect my Ultimaker to my OpenIndiana Server. It is a serial device accessed through a python software. When connecting the USB I can see it showing up in dmesg: Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] usba: no driver found for interface 1 (nodename: 'data') of Ultimaker BV (www.ultimaker.com) Ultimaker 2.0 Apr 29 11:34:36 node02 usba: [ID 912658 kern.info] USB 1.10 interface (usbif2341,10.config1.0) operating at full speed (USB 1.x) on USB 3.0 root hub: modem@0, usbsacm1 at bus address 2 Apr 29 11:34:36 node02 usba: [ID 349649 kern.info] Ultimaker BV (www.ultimaker.com) Ultimaker 2.0 Apr 29 11:34:36 node02 genunix: [ID 936769 kern.info] usbsacm1 is /pci@0,0/pci1043,84ca@14/communications@1/modem@0 Apr 29 11:34:36 node02 genunix: [ID 408114 kern.info] /pci@0,0/pci1043,84ca@14/communications@1/modem@0 (usbsacm1) online But I do not know where that file would be under /dev. On linux it's somewhere under /dev/ttyUSB or /dev/ttyACM. I have a device under /dev/term that links to ../../devices/pci@0,0/pci1043,84ca@14/communications@1/modem@0:0 like usbsacm1 should. But that device seems not to be correct. Does anybody know where that device usbsacm1 would be under /dev? or do I need anything aditional to get access to that device? Thanks in advance for any advice and Greetings Till _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
