I am getting some very strange connection issues with a BMC. I changed
the IP address, set the username and password, set auth to MD5 ADMIN.
All settings were as they were before, and as they are on other BMCs
(well, the other BMCs have different IP addresses of course).
Suddenly I cannot connect to the BMC anymore. I am connecting to the
other BMCs without a problem. Ipmitool successfully reaches the one
that I cannot; -v -v on ipmitool shows that it is using MD5 ADMIN with
the same username and password, as I specified.
I am getting the following log output from openipmi:
INFO: hulk17 0 ipmi_lan.c(connection_up): Connection 0 to the BMC is up
INFO: hulk17 0 ipmi_lan.c(connection_up): Connection to the BMC restored
EINF: hulk17(0.20)(sel)sel.c(handle_sel_info): IPMI error from SEL info
fetch: c3
WARN: hulk17 0 ipmi_lan.c(lost_connection): Connection 0 to the BMC is
down
SEVR: hulk17 0 ipmi_lan.c(lost_connection): All connections to the BMC
are down
Any ideas what could be going wrong? I am using OpenIPMI version 2.0.7.
--Jen
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Openipmi-developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openipmi-developer
