Andy reported: Debian clang version 19.1.7 is not happy when compiled with `make W=1` (note, CONFIG_WERROR=y is the default):
ipmi_si_platform.c:268:15: error: cast to smaller integer type 'enum si_type' +from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] 268 | io.si_type = (enum +si_type)device_get_match_data(&pdev->dev); The IPMI SI type is an enum that was cast into a pointer that was then cast into an enum again. That's not the greatest style, so instead create an info structure to hold the data and use that. Reported-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> Closes: https://lore.kernel.org/lkml/20250415085156.446430-1-andriy.shevche...@linux.intel.com/ Suggested-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> Signed-off-by: Corey Minyard <co...@minyard.net> --- All of Andy's comments addressed. drivers/char/ipmi/ipmi_si.h | 10 +++++- drivers/char/ipmi/ipmi_si_intf.c | 34 ++++++++++-------- drivers/char/ipmi/ipmi_si_pci.c | 52 +++++++++++++++------------- drivers/char/ipmi/ipmi_si_platform.c | 27 ++++++++------- 4 files changed, 69 insertions(+), 54 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si.h b/drivers/char/ipmi/ipmi_si.h index a7ead2a4c753..508c3fd45877 100644 --- a/drivers/char/ipmi/ipmi_si.h +++ b/drivers/char/ipmi/ipmi_si.h @@ -26,6 +26,14 @@ enum si_type { /* Array is defined in the ipmi_si_intf.c */ extern const char *const si_to_str[]; +struct ipmi_match_info { + enum si_type type; +}; + +extern const struct ipmi_match_info ipmi_kcs_si_info; +extern const struct ipmi_match_info ipmi_smic_si_info; +extern const struct ipmi_match_info ipmi_bt_si_info; + enum ipmi_addr_space { IPMI_IO_ADDR_SPACE, IPMI_MEM_ADDR_SPACE }; @@ -64,7 +72,7 @@ struct si_sm_io { void (*irq_cleanup)(struct si_sm_io *io); u8 slave_addr; - enum si_type si_type; + const struct ipmi_match_info *si_info; struct device *dev; }; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index eea23a3b966e..062f92cace24 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -73,6 +73,10 @@ enum si_intf_state { /* 'invalid' to allow a firmware-specified interface to be disabled */ const char *const si_to_str[] = { "invalid", "kcs", "smic", "bt", NULL }; +const struct ipmi_match_info ipmi_kcs_si_info = { .type = SI_KCS }; +const struct ipmi_match_info ipmi_smic_si_info = { .type = SI_SMIC }; +const struct ipmi_match_info ipmi_bt_si_info = { .type = SI_BT }; + static bool initialized; /* @@ -692,7 +696,7 @@ static void handle_transaction_done(struct smi_info *smi_info) break; } enables = current_global_enables(smi_info, 0, &irq_on); - if (smi_info->io.si_type == SI_BT) + if (smi_info->io.si_info->type == SI_BT) /* BT has its own interrupt enable bit. */ check_bt_irq(smi_info, irq_on); if (enables != (msg[3] & GLOBAL_ENABLES_MASK)) { @@ -1119,7 +1123,7 @@ irqreturn_t ipmi_si_irq_handler(int irq, void *data) struct smi_info *smi_info = data; unsigned long flags; - if (smi_info->io.si_type == SI_BT) + if (smi_info->io.si_info->type == SI_BT) /* We need to clear the IRQ flag for the BT interface. */ smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG, IPMI_BT_INTMASK_CLEAR_IRQ_BIT @@ -1164,7 +1168,7 @@ static int smi_start_processing(void *send_info, * The BT interface is efficient enough to not need a thread, * and there is no need for a thread if we have interrupts. */ - else if ((new_smi->io.si_type != SI_BT) && (!new_smi->io.irq)) + else if (new_smi->io.si_info->type != SI_BT && !new_smi->io.irq) enable = 1; if (enable) { @@ -1235,7 +1239,7 @@ MODULE_PARM_DESC(kipmid_max_busy_us, void ipmi_irq_finish_setup(struct si_sm_io *io) { - if (io->si_type == SI_BT) + if (io->si_info->type == SI_BT) /* Enable the interrupt in the BT interface. */ io->outputb(io, IPMI_BT_INTMASK_REG, IPMI_BT_INTMASK_ENABLE_IRQ_BIT); @@ -1243,7 +1247,7 @@ void ipmi_irq_finish_setup(struct si_sm_io *io) void ipmi_irq_start_cleanup(struct si_sm_io *io) { - if (io->si_type == SI_BT) + if (io->si_info->type == SI_BT) /* Disable the interrupt in the BT interface. */ io->outputb(io, IPMI_BT_INTMASK_REG, 0); } @@ -1614,7 +1618,7 @@ static ssize_t type_show(struct device *dev, { struct smi_info *smi_info = dev_get_drvdata(dev); - return sysfs_emit(buf, "%s\n", si_to_str[smi_info->io.si_type]); + return sysfs_emit(buf, "%s\n", si_to_str[smi_info->io.si_info->type]); } static DEVICE_ATTR_RO(type); @@ -1649,7 +1653,7 @@ static ssize_t params_show(struct device *dev, return sysfs_emit(buf, "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n", - si_to_str[smi_info->io.si_type], + si_to_str[smi_info->io.si_info->type], addr_space_to_str[smi_info->io.addr_space], smi_info->io.addr_data, smi_info->io.regspacing, @@ -1803,7 +1807,7 @@ setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info) { struct ipmi_device_id *id = &smi_info->device_id; if (id->manufacturer_id == DELL_IANA_MFR_ID && - smi_info->io.si_type == SI_BT) + smi_info->io.si_info->type == SI_BT) register_xaction_notifier(&dell_poweredge_bt_xaction_notifier); } @@ -1907,13 +1911,13 @@ int ipmi_si_add_smi(struct si_sm_io *io) /* We prefer ACPI over SMBIOS. */ dev_info(dup->io.dev, "Removing SMBIOS-specified %s state machine in favor of ACPI\n", - si_to_str[new_smi->io.si_type]); + si_to_str[new_smi->io.si_info->type]); cleanup_one_si(dup); } else { dev_info(new_smi->io.dev, "%s-specified %s state machine: duplicate\n", ipmi_addr_src_to_str(new_smi->io.addr_source), - si_to_str[new_smi->io.si_type]); + si_to_str[new_smi->io.si_info->type]); rv = -EBUSY; kfree(new_smi); goto out_err; @@ -1922,7 +1926,7 @@ int ipmi_si_add_smi(struct si_sm_io *io) pr_info("Adding %s-specified %s state machine\n", ipmi_addr_src_to_str(new_smi->io.addr_source), - si_to_str[new_smi->io.si_type]); + si_to_str[new_smi->io.si_info->type]); list_add_tail(&new_smi->link, &smi_infos); @@ -1945,12 +1949,12 @@ static int try_smi_init(struct smi_info *new_smi) pr_info("Trying %s-specified %s state machine at %s address 0x%lx, slave address 0x%x, irq %d\n", ipmi_addr_src_to_str(new_smi->io.addr_source), - si_to_str[new_smi->io.si_type], + si_to_str[new_smi->io.si_info->type], addr_space_to_str[new_smi->io.addr_space], new_smi->io.addr_data, new_smi->io.slave_addr, new_smi->io.irq); - switch (new_smi->io.si_type) { + switch (new_smi->io.si_info->type) { case SI_KCS: new_smi->handlers = &kcs_smi_handlers; break; @@ -2073,7 +2077,7 @@ static int try_smi_init(struct smi_info *new_smi) smi_num++; dev_info(new_smi->io.dev, "IPMI %s interface initialized\n", - si_to_str[new_smi->io.si_type]); + si_to_str[new_smi->io.si_info->type]); WARN_ON(new_smi->io.dev->init_name != NULL); @@ -2267,7 +2271,7 @@ struct device *ipmi_si_remove_by_data(int addr_space, enum si_type si_type, list_for_each_entry_safe(e, tmp_e, &smi_infos, link) { if (e->io.addr_space != addr_space) continue; - if (e->io.si_type != si_type) + if (e->io.si_info->type != si_type) continue; if (e->io.addr_data == addr) { dev = get_device(e->io.dev); diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c index 8c0ea637aba0..17f72763322d 100644 --- a/drivers/char/ipmi/ipmi_si_pci.c +++ b/drivers/char/ipmi/ipmi_si_pci.c @@ -23,30 +23,32 @@ MODULE_PARM_DESC(trypci, static int ipmi_pci_probe_regspacing(struct si_sm_io *io) { - if (io->si_type == SI_KCS) { - unsigned char status; - int regspacing; - - io->regsize = DEFAULT_REGSIZE; - io->regshift = 0; - - /* detect 1, 4, 16byte spacing */ - for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { - io->regspacing = regspacing; - if (io->io_setup(io)) { - dev_err(io->dev, "Could not setup I/O space\n"); - return DEFAULT_REGSPACING; - } - /* write invalid cmd */ - io->outputb(io, 1, 0x10); - /* read status back */ - status = io->inputb(io, 1); - io->io_cleanup(io); - if (status) - return regspacing; - regspacing *= 4; + unsigned char status; + int regspacing; + + if (io->si_info->type != SI_KCS) + return DEFAULT_REGSPACING; + + io->regsize = DEFAULT_REGSIZE; + io->regshift = 0; + + /* detect 1, 4, 16byte spacing */ + for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { + io->regspacing = regspacing; + if (io->io_setup(io)) { + dev_err(io->dev, "Could not setup I/O space\n"); + return DEFAULT_REGSPACING; } + /* write invalid cmd */ + io->outputb(io, 1, 0x10); + /* read status back */ + status = io->inputb(io, 1); + io->io_cleanup(io); + if (status) + return regspacing; + regspacing *= 4; } + return DEFAULT_REGSPACING; } @@ -74,15 +76,15 @@ static int ipmi_pci_probe(struct pci_dev *pdev, switch (pdev->class) { case PCI_CLASS_SERIAL_IPMI_SMIC: - io.si_type = SI_SMIC; + io.si_info = &ipmi_smic_si_info; break; case PCI_CLASS_SERIAL_IPMI_KCS: - io.si_type = SI_KCS; + io.si_info = &ipmi_kcs_si_info; break; case PCI_CLASS_SERIAL_IPMI_BT: - io.si_type = SI_BT; + io.si_info = &ipmi_bt_si_info; break; default: diff --git a/drivers/char/ipmi/ipmi_si_platform.c b/drivers/char/ipmi/ipmi_si_platform.c index 550cabd43ae6..fb6e359ae494 100644 --- a/drivers/char/ipmi/ipmi_si_platform.c +++ b/drivers/char/ipmi/ipmi_si_platform.c @@ -163,9 +163,13 @@ static int platform_ipmi_probe(struct platform_device *pdev) switch (type) { case SI_KCS: + io.si_info = &ipmi_kcs_si_info; + break; case SI_SMIC: + io.si_info = &ipmi_smic_si_info; + break; case SI_BT: - io.si_type = type; + io.si_info = &ipmi_bt_si_info; break; case SI_TYPE_INVALID: /* User disabled this in hardcode. */ return -ENODEV; @@ -213,13 +217,10 @@ static int platform_ipmi_probe(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id of_ipmi_match[] = { - { .type = "ipmi", .compatible = "ipmi-kcs", - .data = (void *)(unsigned long) SI_KCS }, - { .type = "ipmi", .compatible = "ipmi-smic", - .data = (void *)(unsigned long) SI_SMIC }, - { .type = "ipmi", .compatible = "ipmi-bt", - .data = (void *)(unsigned long) SI_BT }, - {}, + { .type = "ipmi", .compatible = "ipmi-kcs", .data = &ipmi_kcs_si_info }, + { .type = "ipmi", .compatible = "ipmi-smic", .data = &ipmi_smic_si_info }, + { .type = "ipmi", .compatible = "ipmi-bt", .data = &ipmi_bt_si_info }, + {} }; MODULE_DEVICE_TABLE(of, of_ipmi_match); @@ -265,7 +266,7 @@ static int of_ipmi_probe(struct platform_device *pdev) } memset(&io, 0, sizeof(io)); - io.si_type = (enum si_type)device_get_match_data(&pdev->dev); + io.si_info = device_get_match_data(&pdev->dev); io.addr_source = SI_DEVICETREE; io.irq_setup = ipmi_std_irq_setup; @@ -296,7 +297,7 @@ static int find_slave_address(struct si_sm_io *io, int slave_addr) { #ifdef CONFIG_IPMI_DMI_DECODE if (!slave_addr) - slave_addr = ipmi_dmi_get_slave_addr(io->si_type, + slave_addr = ipmi_dmi_get_slave_addr(io->si_info->type, io->addr_space, io->addr_data); #endif @@ -335,13 +336,13 @@ static int acpi_ipmi_probe(struct platform_device *pdev) switch (tmp) { case 1: - io.si_type = SI_KCS; + io.si_info = &ipmi_kcs_si_info; break; case 2: - io.si_type = SI_SMIC; + io.si_info = &ipmi_smic_si_info; break; case 3: - io.si_type = SI_BT; + io.si_info = &ipmi_bt_si_info; break; case 4: /* SSIF, just ignore */ return -ENODEV; -- 2.43.0 _______________________________________________ Openipmi-developer mailing list Openipmi-developer@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openipmi-developer
