Hi
I’m attempting to modify the TLS ciphers that are used in an
openldap2-2.4.41-22.16.1.x86_64 environment in our lab, running on SLES 12 SP5.
I’ve used the following command to set the cipher list value to the returned
value of ‘openssl ciphers HIGH’:
ldpdd041:/tmp # cat set-ciphersuite.ldif
dn: cn=config
changetype: modify
add: olcTLSCipherSuite
olcTLSCipherSuite: HIGH
ldpdd041:/tmp # ldapmodify -H ldapi:// -Y EXTERNAL -f set-ciphersuite.ldif
SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
modifying entry "cn=config"
ldpdd041:/tmp # openssl ciphers HIGH
ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:SRP-DSS-AES-256-CBC-SHA:SRP-RSA-AES-256-CBC-SHA:SRP-AES-256-CBC-SHA:DH-DSS-AES256-GCM-SHA384:DHE-DSS-AES256-GCM-SHA384:DH-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA256:DH-RSA-AES256-SHA256:DH-DSS-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:DH-RSA-AES256-SHA:DH-DSS-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-DSS-CAMELLIA256-SHA:DH-RSA-CAMELLIA256-SHA:DH-DSS-CAMELLIA256-SHA:AECDH-AES256-SHA:ADH-AES256-GCM-SHA384:ADH-AES256-SHA256:ADH-AES256-SHA:ADH-CAMELLIA256-SHA:ECDH-RSA-AES256-GCM-SHA384:ECDH-ECDSA-AES256-GCM-SHA384:ECDH-RSA-AES256-SHA384:ECDH-ECDSA-AES256-SHA384:ECDH-RSA-AES256-SHA:ECDH-ECDSA-AES256-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:CAMELLIA256-SHA:PSK-AES256-CBC-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:SRP-DSS-AES-128-CBC-SHA:SRP-RSA-AES-128-CBC-SHA:SRP-AES-128-CBC-SHA:DH-DSS-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:DH-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:DHE-DSS-AES128-SHA256:DH-RSA-AES128-SHA256:DH-DSS-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA:DH-RSA-AES128-SHA:DH-DSS-AES128-SHA:DHE-RSA-CAMELLIA128-SHA:DHE-DSS-CAMELLIA128-SHA:DH-RSA-CAMELLIA128-SHA:DH-DSS-CAMELLIA128-SHA:AECDH-AES128-SHA:ADH-AES128-GCM-SHA256:ADH-AES128-SHA256:ADH-AES128-SHA:ADH-CAMELLIA128-SHA:ECDH-RSA-AES128-GCM-SHA256:ECDH-ECDSA-AES128-GCM-SHA256:ECDH-RSA-AES128-SHA256:ECDH-ECDSA-AES128-SHA256:ECDH-RSA-AES128-SHA:ECDH-ECDSA-AES128-SHA:AES128-GCM-SHA256:AES128-SHA256:AES128-SHA:CAMELLIA128-SHA:PSK-AES128-CBC-SHA
ldpdd041:/tmp #
So I had expected to see that all of these ciphers were being offered for use
by the OpenLDAP server; instead, I see that only a subset of the list is
offered:
sslyze ldpdd041.hop.lab.emc.com:636
.
.
.
* TLS 1.0 Cipher Suites:
Attempted to connect using 80 cipher suites.
The server accepted the following 4 cipher suites:
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA 256
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA 128
TLS_RSA_WITH_AES_256_CBC_SHA 256
TLS_RSA_WITH_AES_128_CBC_SHA 128
The group of cipher suites supported by the server has the following
properties:
Forward Secrecy INSECURE - Not Supported
Legacy RC4 Algorithm OK - Not Supported
* TLS 1.1 Cipher Suites:
Attempted to connect using 80 cipher suites.
The server accepted the following 4 cipher suites:
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA 256
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA 128
TLS_RSA_WITH_AES_256_CBC_SHA 256
TLS_RSA_WITH_AES_128_CBC_SHA 128
The group of cipher suites supported by the server has the following
properties:
Forward Secrecy INSECURE - Not Supported
Legacy RC4 Algorithm OK - Not Supported
* TLS 1.2 Cipher Suites:
Attempted to connect using 156 cipher suites.
The server accepted the following 8 cipher suites:
TLS_RSA_WITH_CAMELLIA_256_CBC_SHA 256
TLS_RSA_WITH_CAMELLIA_128_CBC_SHA 128
TLS_RSA_WITH_AES_256_GCM_SHA384 256
TLS_RSA_WITH_AES_256_CBC_SHA256 256
TLS_RSA_WITH_AES_256_CBC_SHA 256
TLS_RSA_WITH_AES_128_GCM_SHA256 128
TLS_RSA_WITH_AES_128_CBC_SHA256 128
TLS_RSA_WITH_AES_128_CBC_SHA 128
I believe I know why the DHE-based ciphers are not being offered: I haven’t
enabled use of the olcTLSDHParamFile directive. Rather than mess around with
generating the DH param file, etc., I’d like to use ECDHE-based ciphers.
According to p. 160 of
https://www.openldap.org/doc/admin24/OpenLDAP-Admin-Guide.pdf, the ‘TLSECName’
directive allows an ECDHE curve to be specified. When I tried to enable use of
the directive, I received a ‘wrong attibuteType’ error:
ldpdd041:/tmp # cat set-ecname.ldif
dn: cn=config
changetype: modify
add: olcTLSECName
olcTLSECName : secp384r1
ldpdd041:/tmp # ldapmodify -H ldapi:// -Y EXTERNAL -f set-ecname.ldif
SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
ldapmodify: wrong attributeType at line 4, entry "cn=config"
ldpdd041:/tmp #
Does OpenLDAP 2.4.41 not support this directive?
Thanks
tl
Terry Lemons
Senior Principal Software Engineer, Dell EMC
Dell Technologies | Data Management
terry.lem...@dell.com<mailto:terry.lem...@dell.com>
Internal Use - Confidential
