You have to copy the Laszlo-Client from the Step-By-Step scenario into
it to make a complete Binary,
Step by Step is this, isn't it ?

Step by Step :

   1. set JAVA_HOME to jdk 1.5/1.6 or greater,
   2. run ant dist at where build.xml located,
   3. copy openmeetings dir which is inside of dist to red5 server
webapps dir,
   4. change config.xml and install/hibernate.cfg.xml to wanted db
connection, (dont forget to run mysql or any db at this moment)
   5. copy main.lzx.lzr=swf8.swf and maindebug.lzx.lzr=swf8.swf to
red5 webapps dir,
   6. run http://localhost:5080/openmeetings/Install (not install case
sensitive)
   7. watch populated fields from red5 console, it takes a time, grab
o coffee :)
   8. Finally run http://localhost:5080/openmeetings All paths
relative, be careful.

When I compile the client, I must just copy main.lzx.lzr=swf8.swf into
red5/webapps/openmeetings, that's all, isn't it ?

If it is that, I made it...

Two precisions, when I modify for example the file checkLoginData.lzx
inside base/auth/ and go to :
http://localhost:8080/lps-4.3.0/openmeetings/maindebug.lzx?lzr=swf8&lzproxied=solo....when
I can see login frame, the compilation is ending, no ?
And even if I modify checkLoginData.lzx, I must just copy
main.lzx.lzr=swf8.swf inside /red5/webapps/openmeetings/ to applicate
modifications, isn't it ?

Thanks

On Apr 8, 10:25 am, Sebastian Wagner <[email protected]> wrote:
> please refer to the wiki
>
> Additional Notes:
>
>    1. You have to copy the Laszlo-Client from the Step-By-Step
> scenario into it to make a complete Binary, but you can also run it
> from inside OpenLaszlo? Server. You only need to place a
> crossdomain.xml into $RED5_HOME/webapps/root, otherwise the
> Flash-Security-Sandbox will not allow Up- or Downloads.
>
> => you understood this part?
> there is only one SWF to copy from the Client compilation to the
> webapp (+ the Debug-Version if you would like that too), and only if
> you need to make a complete binary. To test and develop you can also
> run the application directly from your openlaszlo server....
>
> sebastian
>
> 2009/4/8 bidab <[email protected]>:
>
>
>
> > I make a new test again...
>
> > I copy my folder "openmeetings" inside red5/webapps/
> > I copy two files : main.lzx.lzr=swf8.swf and
> > maindebug.lzx.lzr=swf8.swf       after client compilation inside
> > openmeetings
> > NO restart of red
> > I made the installation athttp://localhost:5080/openmeetings/install
> > Openmeetings is OK but modifications that I made, not.
>
> > There is another folder or file to copy somewhere ?
>
> > Thanks
>
> > Bidab
>
> > On Apr 8, 9:48 am, bidab <[email protected]> wrote:
> >> Hi,
>
> >> I succeed to compile ! In fact, I must installed OM before and after I
> >> could compile. Now, I would applicate that I change to another OM. So
> >> I copy folder "openmeetings" (that was in dist) inside red5/webapps
> >> and copy two files inside openmeetings :  main.lzx.lzr=swf8.swf and
> >> maindebug.lzx.lzr=swf8.swf.
>
> >> But when I go tohttp://localhost:5080/openmeetings/Install,  it says
> >> that OM is install ....
>
> >> Bidab
>
> >> PS : I will make a french complete tutorial to compile, if you are
> >> interested, tell me...
>
> >> On Apr 7, 3:59 pm, Sebastian Wagner <[email protected]> wrote:
>
> >> > did you run also the installer of openmeetings and imported the
> >> > default values as mentioned in the wiki
>
> >> > Java Webapp (Server-Side)
>
> >> >     * You need Java Version = 6 for running and compiling OpenMeetings
> >> >     * Install red5 fromhttp://build.xuggle.com/job/red5_jdk6_stable/
> >> >     * Download (SVN - Checkout) from:
>
> >> >http://openmeetings.googlecode.com/svn/trunk/webapp/
>
> >> >     * change dir your local copy
> >> >     * Run: ant dist (JAVA_HOME must be set and point to a JDK = 1.6
> >> > and you need ant version = 1.7)
> >> >     * there is now a directory dist, inside of that directory there is
> >> > a compiled openmeetings-webapp with the name openmeetings
> >> >     * use the compiled openmeetings-webapp and copy it to 
> >> > $RED5_HOME/webapps
> >> >     * do the usual install process of openmeetings
>
> >> > * do the usual install process of openmeetings *
>
> >> > sebastian
>
> >> > 2009/4/7 bidab <[email protected]>:
>
> >> > > Now, error are change from openlaszlo, this is the log :
>
> >> > > <a title="#0">ERROR @base/mainMethods.lzx#147: call to undefined
> >> > > function &apos;getLabelTag&apos;</a>
> >> > > <a title="#1">WARNING @base/mainMethods.lzx#374: reference to
> >> > > undefined property &apos;moderatorName&apos;</a>
> >> > > <a title="#2">WARNING @base/mainMethods.lzx#374: reference to
> >> > > undefined property &apos;mymodText&apos;</a>
> >> > > <a title="#3">ERROR @base/mainMethods.lzx#374: undefined object does
> >> > > not have a property &apos;setAttribute&apos;</a>
> >> > > canvas.moderatorStreamID==canvas.streamid false  0&#xa;<a
> >> > > title="#4">ERROR @modules/calendar/dayview/terminarea.lzx#66:
> >> > > reference to undefined variable &apos;parent&apos;</a>
> >> > > <a title="#5">ERROR @modules/calendar/dayview/terminarea.lzx#66:
> >> > > undefined object does not have a property &apos;y&apos;</a>
> >> > > <a title="#6">WARNING @modules/calendar/dayview/terminarea.lzx#66:
> >> > > reference to undefined property &apos;y&apos;</a>
> >> > > INFO @maindebug.lzx#99: #_mainbgcontentNavi.setContextMenu is
> >> > > deprecated.  Use #_mainbgcontentNavi.setAttribute instead
> >> > > main.lzx/oninit: «<canvas>#12#11| This is the canvas»
> >> > > main.lzx/config.xml ondata «<canvas>#12#11| This is the canvas»
> >> > > userSSLString no
> >> > > devRtmpConnection/registerMethods()
> >> > > ################ setId:  4
> >> > > hibRtmpConnection/onconnect
> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate:
> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth =>
> >> > > refreshSessionMeth (must accept one argument)
> >> > > autoLoader/setProgress =====  1
> >> > > autoLoader/setResourceNumber ==  8
> >> > > error  NetConnection.Call.Failed 
> >> > > rtmp://127.0.0.1:1935/openmeetings/hibernate
> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false
> >> > > devRtmpConnection/registerMethods()
> >> > > ################ setId:  5
> >> > > hibRtmpConnection/onconnect
> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate:
> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth =>
> >> > > refreshSessionMeth (must accept one argument)
> >> > > autoLoader/setProgress =====  2
> >> > > autoLoader/setResourceNumber ==  15
> >> > > error  NetConnection.Call.Failed 
> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate
> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false
> >> > > devRtmpConnection/registerMethods()
> >> > > ################ setId:  6
> >> > > hibRtmpConnection/onconnect
> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate:
> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth =>
> >> > > refreshSessionMeth (must accept one argument)
> >> > > autoLoader/setProgress =====  3
> >> > > autoLoader/setResourceNumber ==  23
> >> > > error  NetConnection.Call.Failed 
> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate
> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false
> >> > > devRtmpConnection/registerMethods()
> >> > > ################ setId:  7
> >> > > hibRtmpConnection/onconnect
> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate:
> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth =>
> >> > > refreshSessionMeth (must accept one argument)
> >> > > autoLoader/setProgress =====  4
> >> > > autoLoader/setResourceNumber ==  30
> >> > > error  NetConnection.Call.Failed 
> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate
> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false
> >> > > ERROR @base/functions.lzx#90: undefined object does not have a
> >> > > property 'length'
> >> > > WARNING @base/functions.lzx#90: reference to undefined property
> >> > > 'length'
> >> > > labelerrorPopup:  error
> >> > > explorerBox/setTintRGB «<view>#24#23| /labelerrorPopup/view[2]/view
> >> > > [1]»
> >> > > explorerBox/setTintRGB «Object#25| {ba: 158, bb: 0, ga: 91, gb: 0, ra:
> >> > > 63, rb: 0}»
> >> > > INFO @base/components/explorer/explorerBox.lzx#381: /labelerrorPopup/
> >> > > @_resizeview.setColor is deprecated.  Use /labelerrorPopup/
> >> > > @_resizeview.setAttribute instead
> >> > > WARNING @base/components/explorer/explorerBox.lzx#198: reference to
> >> > > undefined property 'docking'
> >> > > WARNING @base/components/explorer/explorerBox.lzx#226: reference to
> >> > > undefined property 'docking'
>
> >> > > Bidab
>
> >> > > On Apr 7, 3:51 pm, bidab <[email protected]> wrote:
> >> > >> Sorry,   THANKS....
>
> >> > >> On Apr 7, 3:10 pm, Sebastian Wagner <[email protected]> wrote:
>
> >> > >> > you say you test and use with red5 0.7.
> >> > >> > Actually there is nowhere a documentation that you should do that?
>
> >> > >> >http://code.google.com/p/openmeetings/wiki/BuildSources
>
> >> > >> > Java Webapp (Server-Side)
>
> >> > >> >     * You need Java Version = 6 for running and compiling 
> >> > >> > OpenMeetings
> >> > >> >     * Install red5 fromhttp://build.xuggle.com/job/red5_jdk6_stable/
> >> > >> >     * Download (SVN - Checkout) from:
>
> >> > >> > *Install red5 fromhttp://build.xuggle.com/job/red5_jdk6_stable/*
>
> >> > >> > 2009/4/7 bidab <[email protected]>:
>
> >> > >> > > Hi, this is my log when I acceed 
> >> > >> > > tohttp://localhost:5080/openmeetings/
>
> >> > >> > > red5.log :
>
> >> > >> > > 2009-04-07 14:43:00,861 [btpool1-0] WARN  org.mortbay.log - 
> >> > >> > > Committed
> >> > >> > > before 404 null
> >> > >> > > 2009-04-07 14:43:00,861 [btpool1-0] ERROR org.mortbay.log - /
> >> > >> > > openmeetings/
> >> > >> > > java.lang.IllegalStateException: Committed
> >> > >> > >        at 
> >> > >> > > org.mortbay.jetty.Response.resetBuffer(Response.java:995)
> >> > >> > >        at org.mortbay.jetty.Response.sendError(Response.java:240)
> >> > >> > >        at org.mortbay.jetty.Response.sendError(Response.java:340)
> >> > >> > >        at 
> >> > >> > > org.mortbay.jetty.servlet.DefaultServlet.doGet(DefaultServlet.java:
> >> > >> > > 398)
> >> > >> > >        at 
> >> > >> > > javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
> >> > >> > >        at 
> >> > >> > > javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
> >> > >> > >        at 
> >> > >> > > org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:
> >> > >> > > 487)
> >> > >> > >        at org.mortbay.jetty.servlet.ServletHandler.handle
> >> > >> > > (ServletHandler.java:362)
> >> > >> > >        at org.mortbay.jetty.security.SecurityHandler.handle
> >> > >> > > (SecurityHandler.java:216)
> >> > >> > >        at org.mortbay.jetty.servlet.SessionHandler.handle
> >> > >> > > (SessionHandler.java:181)
> >> > >> > >        at org.mortbay.jetty.handler.ContextHandler.handle
> >> > >> > > (ContextHandler.java:726)
> >> > >> > >        at 
> >> > >> > > org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:
> >> > >> > > 405)
> >> > >> > >        at 
> >> > >> > > org.mortbay.jetty.handler.ContextHandlerCollection.handle
> >> > >> > > (ContextHandlerCollection.java:206)
> >> > >> > >        at org.mortbay.jetty.handler.HandlerCollection.handle
> >> > >> > > (HandlerCollection.java:114)
> >> > >> > >        at
>
> ...
>
> read more »
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"OpenMeetings User" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/openmeetings-user?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to