I cannot follow sorry. Please rewrite a clear question. sebastian
2009/4/8 bidab <[email protected]>: > > You have to copy the Laszlo-Client from the Step-By-Step scenario into > it to make a complete Binary, > Step by Step is this, isn't it ? > > Step by Step : > > 1. set JAVA_HOME to jdk 1.5/1.6 or greater, > 2. run ant dist at where build.xml located, > 3. copy openmeetings dir which is inside of dist to red5 server > webapps dir, > 4. change config.xml and install/hibernate.cfg.xml to wanted db > connection, (dont forget to run mysql or any db at this moment) > 5. copy main.lzx.lzr=swf8.swf and maindebug.lzx.lzr=swf8.swf to > red5 webapps dir, > 6. run http://localhost:5080/openmeetings/Install (not install case > sensitive) > 7. watch populated fields from red5 console, it takes a time, grab > o coffee :) > 8. Finally run http://localhost:5080/openmeetings All paths > relative, be careful. > > When I compile the client, I must just copy main.lzx.lzr=swf8.swf into > red5/webapps/openmeetings, that's all, isn't it ? > > If it is that, I made it... > > Two precisions, when I modify for example the file checkLoginData.lzx > inside base/auth/ and go to : > http://localhost:8080/lps-4.3.0/openmeetings/maindebug.lzx?lzr=swf8&lzproxied=solo....when > I can see login frame, the compilation is ending, no ? > And even if I modify checkLoginData.lzx, I must just copy > main.lzx.lzr=swf8.swf inside /red5/webapps/openmeetings/ to applicate > modifications, isn't it ? > > Thanks > > On Apr 8, 10:25 am, Sebastian Wagner <[email protected]> wrote: >> please refer to the wiki >> >> Additional Notes: >> >> 1. You have to copy the Laszlo-Client from the Step-By-Step >> scenario into it to make a complete Binary, but you can also run it >> from inside OpenLaszlo? Server. You only need to place a >> crossdomain.xml into $RED5_HOME/webapps/root, otherwise the >> Flash-Security-Sandbox will not allow Up- or Downloads. >> >> => you understood this part? >> there is only one SWF to copy from the Client compilation to the >> webapp (+ the Debug-Version if you would like that too), and only if >> you need to make a complete binary. To test and develop you can also >> run the application directly from your openlaszlo server.... >> >> sebastian >> >> 2009/4/8 bidab <[email protected]>: >> >> >> >> > I make a new test again... >> >> > I copy my folder "openmeetings" inside red5/webapps/ >> > I copy two files : main.lzx.lzr=swf8.swf and >> > maindebug.lzx.lzr=swf8.swf after client compilation inside >> > openmeetings >> > NO restart of red >> > I made the installation athttp://localhost:5080/openmeetings/install >> > Openmeetings is OK but modifications that I made, not. >> >> > There is another folder or file to copy somewhere ? >> >> > Thanks >> >> > Bidab >> >> > On Apr 8, 9:48 am, bidab <[email protected]> wrote: >> >> Hi, >> >> >> I succeed to compile ! In fact, I must installed OM before and after I >> >> could compile. Now, I would applicate that I change to another OM. So >> >> I copy folder "openmeetings" (that was in dist) inside red5/webapps >> >> and copy two files inside openmeetings : main.lzx.lzr=swf8.swf and >> >> maindebug.lzx.lzr=swf8.swf. >> >> >> But when I go tohttp://localhost:5080/openmeetings/Install, it says >> >> that OM is install .... >> >> >> Bidab >> >> >> PS : I will make a french complete tutorial to compile, if you are >> >> interested, tell me... >> >> >> On Apr 7, 3:59 pm, Sebastian Wagner <[email protected]> wrote: >> >> >> > did you run also the installer of openmeetings and imported the >> >> > default values as mentioned in the wiki >> >> >> > Java Webapp (Server-Side) >> >> >> > * You need Java Version = 6 for running and compiling OpenMeetings >> >> > * Install red5 fromhttp://build.xuggle.com/job/red5_jdk6_stable/ >> >> > * Download (SVN - Checkout) from: >> >> >> >http://openmeetings.googlecode.com/svn/trunk/webapp/ >> >> >> > * change dir your local copy >> >> > * Run: ant dist (JAVA_HOME must be set and point to a JDK = 1.6 >> >> > and you need ant version = 1.7) >> >> > * there is now a directory dist, inside of that directory there is >> >> > a compiled openmeetings-webapp with the name openmeetings >> >> > * use the compiled openmeetings-webapp and copy it to >> >> > $RED5_HOME/webapps >> >> > * do the usual install process of openmeetings >> >> >> > * do the usual install process of openmeetings * >> >> >> > sebastian >> >> >> > 2009/4/7 bidab <[email protected]>: >> >> >> > > Now, error are change from openlaszlo, this is the log : >> >> >> > > <a title="#0">ERROR @base/mainMethods.lzx#147: call to undefined >> >> > > function 'getLabelTag'</a> >> >> > > <a title="#1">WARNING @base/mainMethods.lzx#374: reference to >> >> > > undefined property 'moderatorName'</a> >> >> > > <a title="#2">WARNING @base/mainMethods.lzx#374: reference to >> >> > > undefined property 'mymodText'</a> >> >> > > <a title="#3">ERROR @base/mainMethods.lzx#374: undefined object does >> >> > > not have a property 'setAttribute'</a> >> >> > > canvas.moderatorStreamID==canvas.streamid false 0
<a >> >> > > title="#4">ERROR @modules/calendar/dayview/terminarea.lzx#66: >> >> > > reference to undefined variable 'parent'</a> >> >> > > <a title="#5">ERROR @modules/calendar/dayview/terminarea.lzx#66: >> >> > > undefined object does not have a property 'y'</a> >> >> > > <a title="#6">WARNING @modules/calendar/dayview/terminarea.lzx#66: >> >> > > reference to undefined property 'y'</a> >> >> > > INFO @maindebug.lzx#99: #_mainbgcontentNavi.setContextMenu is >> >> > > deprecated. Use #_mainbgcontentNavi.setAttribute instead >> >> > > main.lzx/oninit: «<canvas>#12#11| This is the canvas» >> >> > > main.lzx/config.xml ondata «<canvas>#12#11| This is the canvas» >> >> > > userSSLString no >> >> > > devRtmpConnection/registerMethods() >> >> > > ################ setId: 4 >> >> > > hibRtmpConnection/onconnect >> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate: >> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth => >> >> > > refreshSessionMeth (must accept one argument) >> >> > > autoLoader/setProgress ===== 1 >> >> > > autoLoader/setResourceNumber == 8 >> >> > > error NetConnection.Call.Failed >> >> > > rtmp://127.0.0.1:1935/openmeetings/hibernate >> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false >> >> > > devRtmpConnection/registerMethods() >> >> > > ################ setId: 5 >> >> > > hibRtmpConnection/onconnect >> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate: >> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth => >> >> > > refreshSessionMeth (must accept one argument) >> >> > > autoLoader/setProgress ===== 2 >> >> > > autoLoader/setResourceNumber == 15 >> >> > > error NetConnection.Call.Failed >> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate >> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false >> >> > > devRtmpConnection/registerMethods() >> >> > > ################ setId: 6 >> >> > > hibRtmpConnection/onconnect >> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate: >> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth => >> >> > > refreshSessionMeth (must accept one argument) >> >> > > autoLoader/setProgress ===== 3 >> >> > > autoLoader/setResourceNumber == 23 >> >> > > error NetConnection.Call.Failed >> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate >> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false >> >> > > devRtmpConnection/registerMethods() >> >> > > ################ setId: 7 >> >> > > hibRtmpConnection/onconnect >> >> > > WARNING @base/hibernate/hibRtmpConnection.lzx#886: Invalid delegate: >> >> > > hibRtmpConnection name: thishib id: hib.refreshSessionMeth => >> >> > > refreshSessionMeth (must accept one argument) >> >> > > autoLoader/setProgress ===== 4 >> >> > > autoLoader/setResourceNumber == 30 >> >> > > error NetConnection.Call.Failed >> >> > > rtmpt://127.0.0.1:8088/openmeetings/hibernate >> >> > > «<netRemoteCallHib>#17#16| #hib/@getsessiondata» false >> >> > > ERROR @base/functions.lzx#90: undefined object does not have a >> >> > > property 'length' >> >> > > WARNING @base/functions.lzx#90: reference to undefined property >> >> > > 'length' >> >> > > labelerrorPopup: error >> >> > > explorerBox/setTintRGB «<view>#24#23| /labelerrorPopup/view[2]/view >> >> > > [1]» >> >> > > explorerBox/setTintRGB «Object#25| {ba: 158, bb: 0, ga: 91, gb: 0, ra: >> >> > > 63, rb: 0}» >> >> > > INFO @base/components/explorer/explorerBox.lzx#381: /labelerrorPopup/ >> >> > > @_resizeview.setColor is deprecated. Use /labelerrorPopup/ >> >> > > @_resizeview.setAttribute instead >> >> > > WARNING @base/components/explorer/explorerBox.lzx#198: reference to >> >> > > undefined property 'docking' >> >> > > WARNING @base/components/explorer/explorerBox.lzx#226: reference to >> >> > > undefined property 'docking' >> >> >> > > Bidab >> >> >> > > On Apr 7, 3:51 pm, bidab <[email protected]> wrote: >> >> > >> Sorry, THANKS.... >> >> >> > >> On Apr 7, 3:10 pm, Sebastian Wagner <[email protected]> wrote: >> >> >> > >> > you say you test and use with red5 0.7. >> >> > >> > Actually there is nowhere a documentation that you should do that? >> >> >> > >> >http://code.google.com/p/openmeetings/wiki/BuildSources >> >> >> > >> > Java Webapp (Server-Side) >> >> >> > >> > * You need Java Version = 6 for running and compiling >> >> > >> > OpenMeetings >> >> > >> > * Install red5 >> >> > >> > fromhttp://build.xuggle.com/job/red5_jdk6_stable/ >> >> > >> > * Download (SVN - Checkout) from: >> >> >> > >> > *Install red5 fromhttp://build.xuggle.com/job/red5_jdk6_stable/* >> >> >> > >> > 2009/4/7 bidab <[email protected]>: >> >> >> > >> > > Hi, this is my log when I acceed >> >> > >> > > tohttp://localhost:5080/openmeetings/ >> >> >> > >> > > red5.log : >> >> >> > >> > > 2009-04-07 14:43:00,861 [btpool1-0] WARN org.mortbay.log - >> >> > >> > > Committed >> >> > >> > > before 404 null >> >> > >> > > 2009-04-07 14:43:00,861 [btpool1-0] ERROR org.mortbay.log - / >> >> > >> > > openmeetings/ >> >> > >> > > java.lang.IllegalStateException: Committed >> >> > >> > > at >> >> > >> > > org.mortbay.jetty.Response.resetBuffer(Response.java:995) >> >> > >> > > at org.mortbay.jetty.Response.sendError(Response.java:240) >> >> > >> > > at org.mortbay.jetty.Response.sendError(Response.java:340) >> >> > >> > > at >> >> > >> > > org.mortbay.jetty.servlet.DefaultServlet.doGet(DefaultServlet.java: >> >> > >> > > 398) >> >> > >> > > at >> >> > >> > > javax.servlet.http.HttpServlet.service(HttpServlet.java:707) >> >> > >> > > at >> >> > >> > > javax.servlet.http.HttpServlet.service(HttpServlet.java:820) >> >> > >> > > at >> >> > >> > > org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java: >> >> > >> > > 487) >> >> > >> > > at org.mortbay.jetty.servlet.ServletHandler.handle >> >> > >> > > (ServletHandler.java:362) >> >> > >> > > at org.mortbay.jetty.security.SecurityHandler.handle >> >> > >> > > (SecurityHandler.java:216) >> >> > >> > > at org.mortbay.jetty.servlet.SessionHandler.handle >> >> > >> > > (SessionHandler.java:181) >> >> > >> > > at org.mortbay.jetty.handler.ContextHandler.handle >> >> > >> > > (ContextHandler.java:726) >> >> > >> > > at >> >> > >> > > org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java: >> >> > >> > > 405) >> >> > >> > > at >> >> > >> > > org.mortbay.jetty.handler.ContextHandlerCollection.handle >> >> > >> > > (ContextHandlerCollection.java:206) >> >> > >> > > at org.mortbay.jetty.handler.HandlerCollection.handle >> >> > >> > > (HandlerCollection.java:114) >> >> > >> > > at >> >> ... >> >> read more » > > > -- Sebastian Wagner http://www.webbase-design.de http://openmeetings.googlecode.com http://www.laszlo-forum.de [email protected] --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "OpenMeetings User" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/openmeetings-user?hl=en -~----------~----~----~----~------~----~------~--~---
