I was able to change the @270 to @0 and have it work, however I had to delete the .X0-lock from the /var/tmp directory. The OpenMoko startup script should probably see to it that this is deleted before X starts.
I wanted to change the display from 640x480 to 480x640 but that resulted in the server not starting. The Xserver error indicates "Fatal server error: no screens found". I don't know much about qemu but I'm guessing something needs to be done to allow qemu to present a 480x640 screen (instead of the 640x480)? I tried "-g 480x640" which didn't work (the man page says this is only for PowerPC and Sparc; apparently that's up to date). I've also noticed that I cannot ssh out to the machine running qemu. I've given OpenMoko's eth0 a static address (and set up its default route, though I'm not leaving my network). Trying to ssh out results in "no route to host". A "man qemu" shows all kinds of relevant -net options, one of which I'm sure will address this if I get time to pursue it further. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rodolphe Ortalo Sent: Tuesday, February 20, 2007 4:11 AM To: [email protected] Subject: Re: qemu-arm images Le mardi 20 février 2007 à 03:13 -0300, jeff a écrit : > I put together an image you can test under qemu, if you so desire. > ftp://ftp.blagblagblag.org/pub/BLAG/developers/jebba/openmoko/ > > Just install qemu, grab the files in one of the revisions' subdirs, and run, > for example, ./qemu-r1049.sh. Voila. [...] Very nice, thanks! BTW, simply removing the "@270" (as per the README) in /etc/X11/Xserver is not enough to have the emulated display vertically on the classical Xserver. In fact, the mokoemu X server does not start anymore. What should be done to have qemu display the UI vertically? Rodolphe PS: I changed the settings in you filesystem image Xserver file via a loop mount - but I guess that's totally unrelated. NOTE: The information in this message is intended for the personal and confidential use of the designated recipient(s) named above. To the extent the recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an obligation of confidentiality, with AuthenTec, then this message and/or any attachments shall be considered confidential information and subject to the confidentiality terms of that agreement. If the reader of this message is not the intended recipient named above, you are notified that you have received this document in error, and any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this document in error, please delete the original message and notify the sender immediately. Thank you. AuthenTec, Inc. http://www.authentec.com
