Nils Faerber <[EMAIL PROTECTED]> writes: > Hi!
Hi! > Now that LCD resume works (yippie!) I am further playing with the NEO > GTA01V4... > > Good news: I had it suspended during the night and today morning it > resumed just fine! The GSM modem was also still GSM conected, i.e. > registered to the provider and accepting calls. being curious, did you compare the battery level before and after ? > > Not so good news: The NEO does not resume on an incoming call. > > Well, I guess this is a configuration issue with the modem, i.e. I would > assume that the events upon which the modem will trigger wake-up events > will be configurable by AT commands. Since the documentation to the > modem is not exactly open I would like to ask just for the config > command and options (if it exists) to enable wakeup on incoming call and > incoming SMS ;) I've no idea on how the modem is working too but at least I can see that there's a irq handler for a "modem wakeup" interrupt. Unfortunately, I don't see where the gpio is configured to do interrupts. Can you try adding : s3c2410_gpio_cfgpin(GTA01_IRQ_MODEM, S3C2410_GPF1_EINT1); before set_irq_type(GTA01_IRQ_MODEM, IRQT_RISING); in mach-gta01:gta01_machine_init() ? Arnaud
