Hi, I am looking at implementing a smart JTAG debugger - ethernet attached, with enough intelligence within it to have some level of JTAG smarts, but not the full OpenOCD.
As a test measure, I've implemented the protocol in the drivers/remote_bitbang.c driver, just to demonstrate that it works. This is successful, but is obviously very slow. I'm trying to work out a sensible split such that the device is fast and responsive, but the firmware within the JTAG device is flexible enough to cope with new micros without upgrades. Does anyone have any comments on where I should start looking? Regards, Andre -- Bluewater Systems - An Aiotec Company Andre Renaud [email protected] 5 Amuri Park, 404 Barbadoes St www.bluewatersys.com PO Box 13 889, Christchurch 8013 www.aiotec.co.nz New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934 ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
