Hi, Spencer Oliver wrote: > On 10 January 2012 15:11, Jonathan Dumaresq <jdumar...@cimeq.qc.ca> > wrote: >> Hi all, >> >> Is there a way to use an stlink with swd right now with openocd ? I >> will use the stm32 M0 devices >> > > Only the stlink-v2 is supported at the moment - swd mode is used by > default. > With regards to using with M0 - not tested ST, are not great at > supporting Open Source projects. > It seem to have a bug with reading 16 bit memory. The target_read_u16 function always return an error. The mdh command too.
I have started to create the stm32f0x flash target. I try to make the probing flash working before sending patches. Regards Jonathan > Cheers > Spen ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
