On 11 January 2012 12:50, Reinhard Biegel <r.bie...@gmx.at> wrote: > Hi! > > I'm running openocd (svn) with a J-Link EDU interface to program and debug a > STM32Lxxx. When connecting gdb to the openocd gdbserver I receive: > "Remote 'g' packet reply is too long: ....." > > Found that post on stackoverflow, where the author suggests a solution: > http://stackoverflow.com/questions/7053067/arm-none-eabi-gdb-and-openocd- > malformed-response-to-offset-query-qoffsets/7661508#7661508 > > Tried it too and it seems to do it - gdb can connect now. So openocd should > somehow check the version of the connected gdb to send the right registers I > think. > > I'm using gdb 7.3.1 (arm-none-eabi) >
This has been an issue for some time. It also depends on whether you are using mainline gdb or one from codesourcery. I have not looked into it for a while, may find some time to try and sort out once and for all :) https://sourceforge.net/apps/trac/openocd/ticket/42 Spen ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
