Alex, Thank you for your reply. I bought JTAGKey to use it with my laptop, using USB port. As a software I wanted to use OpenOCD but it does not work properly for my needs(MIPS CPU). So I use a different program that uses wiggler cable( interface) .But it must be used with a PC that has paralel port.(Not good for laptops). So I was thinking about using that JTAGKey instead of Wiggler JTAG cable . Is that possible? I think I must check how JTAGKey communicates so it can use TAP commands properly Thanks for the reply Ja.
> The JTAGKey is a very dumb interface. It only serializes/deserializes data. > OpenOCD uses that capability to implement a JTAG interface. What do you > want your program to do? Communicating with OpenOCD is probably a good > way to start. Otherwise, look at URJtag. > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] > > Sent: Friday, February 24, 2012 1:36 AM > > To: [email protected] > > Subject: Re: [OpenOCD-devel] How to use interface > > > > Thank you for your reply. > > But I would like to know > > where I can see how OpenOCD communicate with interfaces, particular with > > jtagkey > > interface.Which modules /programs of OpenOCD takes care of that ? > > In other words what programs must I write so that jtagkey will work also > > with > > MY OWN jtag > > programs, not only with OpenOCD. > > Does anyone know? > > Thank you for your reply. > > > > > > > > I can use openOCD with my JTAG that is jtagkey like this > > > > > > > > c:/openocd/bin/openocd.exe -f interface/jtagkey.cfg -f > > > > target/myConfiguration.cfg > > > > > > > > Is there any way how I can use my JTAG, that is jtagkey, with another > > > > jtag > > > > programs and not > > > > only with openOCD? > > > > Where can I check how OpenOCD communicate with jtagkey ? > > > > Thanks > > > OpenOCD has two sockets that other programs can telnet into. There is one > > > command-line socket and one gdb-socket. > > > > > > GDB-port (used by some programs / plugins.. some people combine for > > > instance eclipse and yagarto): > > > http://openocd.sourceforge.net/doc/html/GDB-and-OpenOCD.html#GDB-and-OpenOCD > > > > > > telnet port (very little info here): > > > http://openocd.sourceforge.net/doc/html/OpenOCD-Project-Setup.html#OpenOCD- > > Project-Setup > > > This is the most useful one for doing things like programming flash etc > > > from the console > > > > > > > > > Here is a list of known working interfaces. jtagkey is on the list: > > > http://openocd.sourceforge.net/doc/html/Debug-Adapter-Hardware.html#Debug- > > Adapter-Hardware > > > > > > Stian skjelstad > > > > > > > > > > > ------------------------------------------------------------------------------ > > Virtualization & Cloud Management Using Capacity Planning > > Cloud computing makes use of virtualization - but cloud computing > > also focuses on allowing computing to be delivered as a service. > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > _______________________________________________ > > OpenOCD-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
