Hi there! First of all - thx for all your work on SWD!
I have two questions: 1. What steps should I follow to add "drier" for "normal", non-SWD-aware interface, where you'd have two pins (In and Out) shorted with two resistors to form the SWDIO signal? Is that possible? (; 2. Would that be possible to have SWDIO signal on ONE pin of FT2232 in case of interfaces with no buffers (pin in IDC connector is routed directly to pin in FT2232)? In other words - would that be possible to change direction of transfer with internal direction of FT2232 pins instead of using some pin to change state of some external circuitry? Thx for the answers! I'll try to compile your code in a while and will inform about the results. If I would manage to add support for some "standard" JTAG (JTAGkey / JTAG-lock-pick) I'd like to post that binary on my website for other people to test/use. Regards, FCh ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
