On 2 September 2012 20:01, Freddie Chopin <freddie_cho...@op.pl> wrote: > W dniu 2012-09-02 10:43, ger...@openocd.zylin.com pisze: >> flash: fix sam3 page read/write address computation error >> >> In at91sam3.c for Atmel SAM3 flash support, there are arithmetic errors >> in the functions sam3_page_read() and sam3_page_write(). >> Address locations are computed incorrectly due to an extra addition >> operation. This leads to memory locations being skipped during >> flash writes and reads. >> >> Smaller programs are written successfully into flash, with memory gaps, >> while larger programs of legitimate size fail because the >> skipped memory is not utilized and therefore unavailable. >> >> The changes address this condition, and have been tested with an Atmel >> SAM3X-EK evaluation board. > > Should this be included in 0.6.0? If yes, should we do another rc? >
If it is a valid fix then yes - can someone test ? Spen ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
