Paul
Thank you for the reply.
But it reports a different error now
C:\openocdbin1>c:\openocdbin1\openocd -f interface/ftdi/jtagkey.cfg -f
target/mytest.cfg
Open On-Chip Debugger 0.8.0-dev-g03d7da0 (2014-02-03-18:49)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.sourceforge.net/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
adapter speed: 6 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
connect_deassert_srst
memtest1
Error: libusb_open() failed with LIBUSB_ERROR_NOT_FOUND
Error: no device found
Error: unable to open ftdi device with vid 0403, pid cff8, description 'Amontec
JTAGkey' and
serial '*'
in procedure 'init'
Where can be a problem now?
Thanks
> On Tue, Feb 04, 2014 at 01:53:38PM +0100, Jahn wrote:
> > Paul,
> > Thank you for your help.
> > Now I can build the openOCD successfully but I am not able to run it
> > successfully. It says
> >
> >
> > C:\openocdbin1>c:\openocdbin1\openocd -f interface/jtagkey.cfg -f
> > target/mytest.cfg
>
> You should be using
> openocd -f interface/ftdi/jtagkey.cfg -f target/mytest.cfg
> instead (note ftdi/ subdirectory for your adapter)
>
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:fercer...@gmail.com
------------------------------------------------------------------------------
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
