On Wed, Apr 2, 2014 at 8:49 PM, Borton, Nick <[email protected]> wrote:
> Hello, > > > > I've been developing with custom Freescale K60 boards for around a year, > using OpenOCD 0.7.0 + Olimex-ARM-USB-OCD-H for programming and debugging. > For the most part it works great, and thanks to everyone who put this tool > together. I do however have issues initially programming some virgin parts. > I have tried upgrading to 0.8.0-rc1, I have googled all sorts of odd > procedures from other tools (hold reset low, and then issue a mass erase). > I've tried running an erase with the flash command (no good when reset is > held though), and I've tried using a combination of irscan + drscan to > issue the mass erase manually. > > > > I have to imagine that others have had this issue. Maybe I'm missing > something in the docs? Is there an undocumented command? > > It will not be easy to help you without the details of how it fails. Show the complete command line and any custom config files you might use and attach a debug log from a (short) session when it fails. I've had some failures with a k40 part myself, not sure if it's related. /Andreas
------------------------------------------------------------------------------
_______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
