Hi Paul, On 09/04/14 16:09, Paul Fertser wrote: > On Wed, Apr 09, 2014 at 03:56:35PM +1000, Greg Ungerer wrote: >> On 09/04/14 14:10, Paul Fertser wrote: >>> On Wed, Apr 09, 2014 at 10:35:30AM +1000, Greg Ungerer wrote: >>>> I doesn't really feel totally right to me. The mmu on and off states >>>> are a pain to deal with (thus the HACK section above which relies on >>>> running the CPU BOOTrom code again). But none the less this manages >>>> to load and run u-boot for me. >>> >>> Wasn't it all fixed by http://openocd.zylin.com/#/c/1787/ ? >> >> Looks like it would be. I am still using a code base from a few >> months back. I will try out the head code when I get a minute. > > TIA. If it still doesn't work feel free to ping me here or on IRC; I'd > really like to get to the bottom of this.
Testing not going so well. I can't do any access to memory at all with the latest git openocd. It fails whenever I try an access to RAM with errors like: > mdw 0 0x20 Timeout (1000ms) waiting for ACK=OK/FAULT in JTAG-DP transaction - aborting JTAG-DP OVERRUN - check clock, memaccess, or reduce jtag speed MEM_AP_CSW 0x800000c2, MEM_AP_TAR 0xc230108c Failed to read memory and, additionally, failed to find out where JTAG-DP STICKY ERROR MEM_AP_CSW 0x800000c2, MEM_AP_TAR 0xc230108c JTAG-DP STICKY ERROR MEM_AP_CSW 0x800000c2, MEM_AP_TAR 0xc230108c error Regards Greg ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
