This evening I tried this without the other changes and no luck. I believe
the reason is that it may have eliminated one of the set_configuration
calls, but the reset still caused a hang.
Xiaofan Chen's comments appear to be correct in that this change would only
address libusb1.0 also.
Possibly on windows this change would work in isolation because the reset
isn't called on that platform.
Do you use or have access to a LPC Link-2 with JLink firmware as well? I
have only access to Ubuntu Linux for the next week or so, but afterward I
can try on windows 7 with various combinations of backend.
On Thu, Sep 11, 2014 at 12:27 AM, Paul Fertser <[email protected]> wrote:
> On Mon, Sep 08, 2014 at 09:00:59PM -0700, Anders Oleson wrote:
> > I have been working with an LPC Link-2 configured with JLink firmware (as
> > distributed by Segger and LPC). This firmware basically turns the very
> nice $20
> > LPC Link-2 board into a JLink adapter. It is clear to me that Segger had
> a hand
> > in this firmware and you can find references to it on their pages as
> well as on
> > LPC's pages.
>
> Please see if http://openocd.zylin.com/2288 helps.
>
> --
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:[email protected]
>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
