Apologies. I meant I tried Paul's Gerrit change 2288 with no luck.
On Thu, Sep 11, 2014 at 8:23 PM, Anders Oleson <[email protected]> wrote:
> This evening I tried this without the other changes and no luck. I believe
> the reason is that it may have eliminated one of the set_configuration
> calls, but the reset still caused a hang.
>
> Xiaofan Chen's comments appear to be correct in that this change would
> only address libusb1.0 also.
>
> Possibly on windows this change would work in isolation because the reset
> isn't called on that platform.
>
> Do you use or have access to a LPC Link-2 with JLink firmware as well? I
> have only access to Ubuntu Linux for the next week or so, but afterward I
> can try on windows 7 with various combinations of backend.
>
> On Thu, Sep 11, 2014 at 12:27 AM, Paul Fertser <[email protected]>
> wrote:
>
>> On Mon, Sep 08, 2014 at 09:00:59PM -0700, Anders Oleson wrote:
>> > I have been working with an LPC Link-2 configured with JLink firmware
>> (as
>> > distributed by Segger and LPC). This firmware basically turns the very
>> nice $20
>> > LPC Link-2 board into a JLink adapter. It is clear to me that Segger
>> had a hand
>> > in this firmware and you can find references to it on their pages as
>> well as on
>> > LPC's pages.
>>
>> Please see if http://openocd.zylin.com/2288 helps.
>>
>> --
>> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
>> mailto:[email protected]
>>
>
>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
