On Thu, Mar 26, 2015 at 05:13:48PM +0100, Jens Bauer wrote: > Normally I would run something like ... 'init; reset halt; > wait_halt; flash write_image erase unlock "output/fileToFlash.elf"; > reset run; sleep 10; shutdown', but reducing the commands to just > 'init; shutdown' still causes exit status 1 to be returned. I > reduced the test to use 'adapter_khz 10' to make the output shorter.
I also suggest to try "program" for flashing devices instead, it's supposed to be properly documented in the official manual. -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:[email protected] ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
