On 26.03.2015 08:17, frank wrote: > Besides the suggestion to check correct wiring of reset, the reset pin > can also be configured for other purposes with the switchmatrix. > If it is no longer is a reset function, it will not work anyways. It is configured as reset - when I pull the pin low, the target stops and re-starts when releasing it.
> When using "reset config none", the reset line is not pulled low, and > can stay connected. > > So why not stick to "reset config none", and leave reset line > unconnected? Well - I would if it worked that way. However, with the KT-Link, I can't connect to the LPC812, regardless of the used reset config. I don't know if reset is generally needed or not, I am just reporting the observed behaviour. thanks, Michael ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
