On Wed, Mar 25, 2015 at 11:26 PM, Michael Schwingen <mich...@schwingen.org>
wrote:
> The results are:
> - Busblaster/KTLink works fine with a STM32F103 target, both with
> "reset_config none" and with "reset_config srst_only". When selecting
> srst_only, I can see a low-pulse on the reset line.
>
>
> - Busblaster/KTLink does not work at all with the LPC812. Even when
> selecting "reset_config srst_only", there is *no* reset pulse, the reset
> line stays high all the time.
>
>
Well, I guess the obvious explanation would be that the reset line is
either shorted high or broken on your LPC812 setup. But of course you've
already checked that...
/Andreas
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
