On Sat, May 16, 2015 at 9:18 PM, Xiaofan Chen <[email protected]> wrote: >> I tried a few STM32 Discovery Board as well, F0 and F3 >> both are okay (ST-Link V2), VL does not seem to work >> (ST-Link V1). Even after using the work-around proposed >> by Paul (#reset_config srst_only; to comment out this line >> in the board config file), it does not seem to work under >> Mac OS X. I will try to see if it works under Windows or not. > > I see there is a fix in gerrit and I will give it a try later. > jtag/drivers/stlink: SRST issue with stlink-v1 > http://openocd.zylin.com/#/c/2761/ >
BTW, the above fix is included in 0.9.0 and it fixed the ST-Link V1 issue I had with 0.9.0-rc1. -- Xiaofan ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
