On Sat, May 23, 2015 at 10:09 PM, Xiaofan Chen <[email protected]> wrote: > On Sat, May 23, 2015 at 9:54 PM, Xiaofan Chen <[email protected]> wrote: >> On Sat, May 16, 2015 at 9:18 PM, Xiaofan Chen <[email protected]> wrote: >>>> I tried a few STM32 Discovery Board as well, F0 and F3 >>>> both are okay (ST-Link V2), VL does not seem to work >>>> (ST-Link V1). Even after using the work-around proposed >>>> by Paul (#reset_config srst_only; to comment out this line >>>> in the board config file), it does not seem to work under >>>> Mac OS X. I will try to see if it works under Windows or not. >>> >>> I see there is a fix in gerrit and I will give it a try later. >>> jtag/drivers/stlink: SRST issue with stlink-v1 >>> http://openocd.zylin.com/#/c/2761/ >>> >> >> BTW, the above fix is included in 0.9.0 and it fixed the >> ST-Link V1 issue I had with 0.9.0-rc1. > > I also tested 0.9.0 with F072 discovery board and F4 > discovery board and both are okay as well. I do not > have F2 boards. >
Today I tested a STM32F1 demo boards with a V3 J-Link, V7 J-Link and JTAGKey 2. all are fine. -- Xiaofan ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
