On 30.09.2015 7:38, Tomas Vanek wrote:
VLPR is not active until you set LPBOOT option FOPT register (0x40d)
Patch should cover much more devices than K22.
Sorry, Kx MCUs always use normal run mode after reset - so using reset
init before programming is sufficient.
VLPR mode after reset can be configured by LPBOOT option on some KL
devices (e.g. KL17).
Tom
------------------------------------------------------------------------------
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
