Tomas Vanek writes:
Tomas> Check if SRST is connected to RESETN
I found the schematic for the D20 Xplained board; it's contained within the
following design documents archive, available at:
http://www.atmel.com/Images/Atmel-42102-SAMD20-Xplained-Pro_User-Guide.zip
The schematic does not use SRST as a label. The SWD interface refers to
TARGET_RESET_SENSE, which is connected to RESET_SENSE_INTERNAL via a level
shifter.
I'm not sure this is the information you requested. Please let me know if
there's something else I should look for in the schematic.
----
The information contained in this email message, including any attachments or
links to documents, may include privileged, confidential and/or inside
information and is intended only for use of the individual or entity named
above. If the reader of this message is not the intended recipient, or the
employee or agent responsible to deliver it to the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this communication
in error, please immediately notify the sender and destroy the original
message. Thank you.
------------------------------------------------------------------------------
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
