FWIW the Debian package installs the udev rules to
lib/udev/rules.d/60-openocd.rules, as they are part of the package. However
they do not have the 2141 PID in them, just 03eb/204f, so if it was working
before there must have been something extra installed/configured.
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 03:30 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
