Dear all,
thanx again for your help. But still I have the feeling something changed in
the Ubuntu/openocd settings.
In the Arduino IDE all my other program possibilities show as a port. Also the
Teensy, which uses a udev entry in the rules.d.
Only the Atmel ICE using openocd doesn't show.
I did not update the IDE, but Ubuntu updates I alway do.
Anyyway, I can continue with programming.
kind regards, Andries
openocd -f openocd.cfg -c "program test.bin exit 0x00000000"
works, that's a start :-)
but can you still help me with the programmer getting accessible in the IDE?
Then that is an IDE issue and not an OpenOCD issue.
You really need to ask about the IDE issue on the appropriate forum.
________________________________
[tickets:#258]<https://sourceforge.net/p/openocd/tickets/258/> sudo apt install
openocd
Status: new
Milestone: 0.9.0
Labels: openOCD arduino no port
Created: Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
Last Updated: Wed Nov 20, 2019 07:50 PM UTC
Owner: Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
________________________________
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/openocd/tickets/258/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
---
** [tickets:#258] sudo apt install openocd**
**Status:** new
**Milestone:** 0.9.0
**Labels:** openOCD arduino no port
**Created:** Wed Nov 20, 2019 12:22 PM UTC by Andries Oyens
**Last Updated:** Wed Nov 20, 2019 09:44 PM UTC
**Owner:** Paul Fertser
Dear people,
I used to program with arduino ade SAMD21 boards (as a ArduinoZero) with Atmel
SAM-ICE. Suddenly the Arduino IDE does no see the Atmel SAM-ICE programmer on a
USB port.
typing openocd in terminal finds the programmer and connected board.
What can I do to find the programmer in the Arduino IDE?
kind regards, Andries
---
Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is
subscribed to https://sourceforge.net/p/openocd/tickets/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
