This is an automated email from Gerrit.

"Name of user not set <sean.ander...@seco.com>" just uploaded a new patch set 
to Gerrit, which you can find at https://review.openocd.org/c/openocd/+/6855

-- gerrit

commit 223aed698b90f5eb0ee7090d33dde7a64a44be98
Author: Sean Anderson <sean.ander...@seco.com>
Date:   Mon Feb 21 14:53:46 2022 -0500

    board: Add LS1046ARDB
    
    This adds support for the LS1046A Reference Design Board. There are
    several JTAG headers accessable once the case is opened, but this config
    is for the externally-accessable CMSIS DAP.
    
    Signed-off-by: Sean Anderson <sean.ander...@seco.com>
    Change-Id: I0f83470da3758f0c4512ce47348c4db7de17b27e

diff --git a/tcl/board/nxp_rdb-ls1046a.cfg b/tcl/board/nxp_rdb-ls1046a.cfg
new file mode 100644
index 000000000..fde1829fb
--- /dev/null
+++ b/tcl/board/nxp_rdb-ls1046a.cfg
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# NXP LS1046ARDB (Reference Design Board)
+# This is for the "console" USB port on the front panel
+# You must ensure that SW4-7 is in the "off" position
+
+# NXP K20
+# The firmware implements the old CMSIS-DAP v1 USB HID interface
+# You must pass --enable-cmsis-dap to ./configure to enable it
+source [find interface/cmsis-dap.cfg]
+
+transport select jtag
+reset_config srst_only
+
+source [find target/ls1046a.cfg]
+
+# The adapter can't handle 10MHz
+adapter speed 5000

-- 

Reply via email to