What's the output of lsusb before and after the device is connected to the computer? Just in case some other driver is getting associated with the ftdi device.
Might also be useful to check dmesg output when you connect the device in case that sheds any light on how the device is getting detected and set up. --- ** [tickets:#346] OpenOCD configuration issue with Attify badge and STM32F1X as target** **Status:** new **Milestone:** 0.10.0 **Labels:** OpenOCD configuration issue with Attify badge and STM32F1 as target **Created:** Tue Apr 05, 2022 05:26 AM UTC by Shraddha Pande **Last Updated:** Tue Apr 05, 2022 05:26 AM UTC **Owner:** OpenOCD-Gerrit Hello, I am trying to configure Openocd with Attify badge and STM32 as target on linux. I am using following command openocd -f badge.cfg -f stm32f1x.cfg I am getting below error no device found unable to open ftdi device with vid 0403, pid 6014, description '', serial '' at bus location '*' I have installed serial drivers required for attify badge but somehow I can not find any device under lsusb Can someone please help me to resolve this issue. Thank you. --- Sent from sourceforge.net because openocd-devel@lists.sourceforge.net is subscribed to https://sourceforge.net/p/openocd/tickets/ To unsubscribe from further messages, a project admin can change settings at https://sourceforge.net/p/openocd/admin/tickets/options. Or, if this is a mailing list, you can unsubscribe from the mailing list.
