Hi Oleksij Rempel, As requested, please find below the link to my pull request raised for the OpenOCD repository:
🔗 PR Link: https://github.com/openocd-org/openocd/pull/44 Kindly review it and let me know if any further changes are required. Thanks & Regards, Dinesh Arasu ________________________________ From: Oleksij Rempel <[email protected]> Sent: Thursday, August 28, 2025 1:15 PM To: Dinesh Arasu - I18360 <[email protected]>; [email protected] <[email protected]> Cc: Raveendran Sulli - I20043 <[email protected]>; Vinoth Kumar - I41670 <[email protected]>; Karthikeyan Jegatheesan - I41640 <[email protected]>; Saravanakumar Sundaram - I41786 <[email protected]> Subject: Re: Add WBZ451/WBZ351/WBZ653 flash driver support for OpenOCD EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe Hi Dinesh, Am 28.08.25 um 08:25 schrieb [email protected]: > Hi OpenOCD Maintainers, > > I have developed a new OpenOCD flash driver for the Microchip > WBZ451/WBZ351/WBZ653 wireless MCUs, including: > > - Full row-programming support (1024 bytes per row) > - Multi-bank flash support > - erase/write sequences > - Tested successfully with ELF and HEX images via OpenOCD > > I am planning to submit a pull request on GitHub to contribute to this > driver. Please let me know if you have any concerns, suggestions, or > preferred naming > conventions for the driver and TCL target files. Please read following documentations before submitting: https://openocd.org/doc-release/doxygen/patchguide.html https://openocd.org/doc/doxygen/html/index.html As for naming convetions, it is hard to say without seeing the code. If you have some WIP version somewhere on github, or somewhere else, can you please point it? Best Regards, Oleksij
