dswei wrote: > For my s3c2410 board, the openocd.cfg is below. > First, there is u-boot on the flash, and I can halt the board with openocd > correctly. > After erasing the flash today, When I telnet to to openocd, run the > 'halt' command, it causes a 'time out' error: > > halt > timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: 4 > timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: 4 > timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: 4 > timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: 4 > timed out while waiting for target halted > >
Have you tried working with the latest trunk code? The problem might already be solved, whatever it is... Carlos Antunes _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
