On Sun, Jul 5, 2009 at 9:53 PM, Xiaofan Chen<[email protected]> wrote: > On Sun, Jul 5, 2009 at 10:29 AM, Xiaofan Chen<[email protected]> wrote: >> It does not help me for the V3 and V7 I tried. Strangely the Linux distros >> play a part as well. It seems to be more stable under Ubuntu 9.04 than >> Arch Linux. >> > > For example, I've no problems with the STM3210E-Eavl board under > Ubuntu 9.04. But it does not seem to work under Arch Linux (with > J-Link V3 and V7).
Under Arch Linux and OpenSuse 11.1, J-Link does not seem to work now with SVN2462. Under Ubuntu 9.04 and Fedora 10, J-Link works most of the time. [mc...@ubuntu904 jlinkv7]$ openocd -f stm3210e.cfg Open On-Chip Debugger 0.2.0-in-development (2009-07-05-22:29) svn:2462 $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS 1000 kHz jtag_nsrst_delay: 100 jtag_ntrst_delay: 100 Info : J-Link ARM V7 compiled May 27 2009 17:29:25 Info : JLink caps 0xb9ff7bbf Info : JLink hw version 70000 Info : JLink max mem block 9120 Info : Vref = 3.261 TCK = 1 TDI = 0 TDO = 1 TMS = 0 SRST = 1 TRST = 1 Info : J-Link JTAG Interface ready Info : JTAG tap: stm32.cpu tap/device found: 0x3ba00477 (mfg: 0x23b, part: 0xba00, ver: 0x3) Info : JTAG Tap/device matched Info : JTAG tap: stm32.bs tap/device found: 0x06414041 (mfg: 0x020, part: 0x6414, ver: 0x0) Info : JTAG Tap/device matched But sometimes it does not work, unplug and plug in J-Link seems to fix the problem. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
