Sergey Lapin skrev: > On Mon, Jul 6, 2009 at 7:43 PM, Magnus Lundin<[email protected]> wrote: > >> Wookey skrev: >> >>> +++ Sergey Lapin [2009-07-06 19:02 +0400]: >>> >>> >>>> Hi, all! >>>> >>>> Is there any news regarding support of BeagleBoard in OpenOCD? >>>> Last time I checked, there was none, I'm interested to help, so I >>>> want to know the status and what can I do. >>>> >>>> >>> There is a config file for it in SVN, so I assume there is some... >>> >>> Wookey >>> >>> >> Hi list, >> >> I have done some work and it works as far as >> - CortexA8 can be halted, stepped and resumed if MMU is inactive. >> - Data can be up and downloaded to RAM >> - We can read and modify memory mapped registers >> - Breakpoints work, but not yet watchpoints, not problems here, it is >> simply not done yet. >> >> So uBoot and standalone programs can be debugged, and it should be >> possible to write some flash writing code. >> Debugging Linux on BeagleBoard does not work. >> > > Which dongle were you using to debug on Beagle? > > TinCanTools Flyswatter with the BeagleBoard adapter gives both JTAG and serial port monitor. >> I have not had time to keep up with the latest changes in trunk, so >> there will be some to clean up the code, and I will not have time for >> more work for the near future. >> So I will write up some status comments and publish what I have done, as >> is, before the end of the week. >> > Thanks a lot, I really can't wait to see your code! > > Thanks a lot for doing this! > S. > M.
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
