On Thu, Jul 23, 2009 at 6:29 PM, Leon Woestenberg<[email protected]> wrote: > Hello, > > 2009/7/23 Michel Catudal <[email protected]>: >> >> Hitex may very well have several versions for their USB debugging. There is >> an interest in getting something faster than the ftdi device. >> From what Leon posted, his device may not be an ftdi but some >> microprocessor. >> > In fact, yes there is an STM32F103 in front of the STM32F107, close to > the USB A connector. > > I assume the STM32F103 is the Debug Interface to the STM32F107. > > The on-CD schematics are not complete. > > This might not be easy to get going in open-source fashion...
In that case, it is not using FDTI device and the STM32F103 is the debug interface. The website mentions that it has the following features. # JTAG debugging over USB connector # UART comunication to the application over USB connector Is this still true with your hardware? It is interesting to see the output of "lsusb -vvv". In this case, it would not be as easy to work out an OpenOCD cable driver unless you are willing to do some reverse-engineering. -- Xiaofan http://mcuee.blogspot.com _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
