> Better explanation for the TAP "-ircapture" parameter.
> ---
> doc/openocd.texi | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> --- a/doc/openocd.texi
> +++ b/doc/openocd.texi
> @@ -2198,7 +2198,10 @@ Every TAP requires at least the followin
>
> @itemize @bullet
> @item @code{-ircapture} @var{NUMBER}
> -...@*the IDCODE capture command, such as 0x01.
> +...@*the bit pattern loaded by the TAP into the JTAG shift register on
> +entry to the @sc{ircapture} state, such as 0x01.
> +JTAG requires the two LSBs of this value to be 01.
> +The value is used to verify that instruction scans work correctly.
> @item @code{-irlen} @var{NUMBER}
> @*The length in bits of the
> instruction register, such as 4 or 5 bits.
>
committed
cheers
spen
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
