The following patch splits LM3S811 config file into target file and board file.
I also modified the target config file based on the some suggestions of David
Brownell on the LM3S1968 file.
But I do not have the board. Hopefully the patch is ok to be commited.
Index: tcl/target/lm3s811.cfg
===================================================================
--- tcl/target/lm3s811.cfg (revision 2578)
+++ tcl/target/lm3s811.cfg (working copy)
@@ -1,4 +1,4 @@
-# Script for luminary lm3s811
+# Script for TI/Luminary Stellaris LM3S811
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
@@ -16,26 +16,16 @@
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
- # force an error till we get a good number
set _CPUTAPID 0x3ba00477
}
-# jtag speed
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only
-
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf
-expected-id $_CPUTAPID
# the luminary variant causes a software reset rather than asserting SRST
# this stops the debug registers from being cleared
# this will be fixed in later revisions of silicon
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position
$_TARGETNAME -variant lm3s
# 8k working area at base of ram
Index: tcl/board/ek-lm3s811.cfg
===================================================================
--- tcl/board/ek-lm3s811.cfg (revision 0)
+++ tcl/board/ek-lm3s811.cfg (revision 0)
@@ -0,0 +1,19 @@
+#
+# TI/Luminary Stellaris LM3S811 Evaluation Kits
+#
+# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+
+# include the FT2232 interface config for on-board JTAG interface
+source [find interface/luminary.cfg]
+
+# include the target config
+source [find target/lm3s811.cfg]
+
+# jtag speed
+jtag_khz 500
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#LM3S811 Evaluation Board has only srst
+reset_config srst_only
--
Xiaofan http://mcuee.blogspot.com
Index: tcl/target/lm3s811.cfg
===================================================================
--- tcl/target/lm3s811.cfg (revision 2578)
+++ tcl/target/lm3s811.cfg (working copy)
@@ -1,4 +1,4 @@
-# Script for luminary lm3s811
+# Script for TI/Luminary Stellaris LM3S811
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
@@ -16,26 +16,16 @@
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
- # force an error till we get a good number
set _CPUTAPID 0x3ba00477
}
-# jtag speed
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only
-
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id
$_CPUTAPID
# the luminary variant causes a software reset rather than asserting SRST
# this stops the debug registers from being cleared
# this will be fixed in later revisions of silicon
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position
$_TARGETNAME -variant lm3s
# 8k working area at base of ram
Index: tcl/board/ek-lm3s811.cfg
===================================================================
--- tcl/board/ek-lm3s811.cfg (revision 0)
+++ tcl/board/ek-lm3s811.cfg (revision 0)
@@ -0,0 +1,19 @@
+#
+# TI/Luminary Stellaris LM3S811 Evaluation Kits
+#
+# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+
+# include the FT2232 interface config for on-board JTAG interface
+source [find interface/luminary.cfg]
+
+# include the target config
+source [find target/lm3s811.cfg]
+
+# jtag speed
+jtag_khz 500
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#LM3S811 Evaluation Board has only srst
+reset_config srst_only
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
