Sorry the link given by me is not a direct one. I meant following device at Olimex website:
*ARM-USB-OCD* 3-IN-1 FAST USB ARM JTAG, USB-TO-RS232 VIRTUAL PORT AND POWER SUPPLY 5-9-12VDC DEVICE (SUPPORTED BY OPENOCD OPEN SOURCE ARM DEBUGGER) On Tue, Aug 25, 2009 at 12:52 PM, Rohit Chandel <[email protected]>wrote: > > > On Mon, Aug 24, 2009 at 9:02 PM, Freddie Chopin <[email protected]>wrote: > >> 1st of all - write to the list >> >> >It does have a USB <=> RS-232 converter. FT2232 is like 2 devices in >> one >> >chip - one is the JTAG (that's FT2232 channel A), and the other is >> >RS-232 converter (that's FT2232 channel B). Those two devices can (and >> >in this case - should) have different drivers, for example libusb-win32 >> >for JTAG, original FTDI drivers for RS-232 channel. >> > > >> It might seem silly question for an experienced person but please excuse >> for this. Does that mean that I need to first install the the drivers which >> came along with the ARM-USB-TINY on a CD and then uninstall the driver for >> JTAG. And then install libusb-win32 for JTAG alone? >> > > Also I am unable to understand for what purpose I need the RS232 converted. > My Jtag hardware's(olimex USB TINY) one end goes to USB drive and other goes > to jtag socket on ARM board. It does not have an RS232port like the one > mentioned here > http://www.olimex.com/dev/index.html > > >> >> >the inf file is fine, but you need the "original" drivers for the RS-232 >> >channel. You may of course ignore that channel if you don't need it. > > > Does ignoring means that I should just install the driver only once(for > jtag) and on second time when prompted for drivers I should ignore it? > > >> Regards >> > Rohit > >> >> _______________________________________________ >> Openocd-development mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/openocd-development >> > >
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
