Here is my first git patch :-) This is the very basic board config for the balloon3 board cpu JTAG channel.
The rest of the config comprises another 14 .cfg files which I suspect openocd doesn't really want all of. I'm still not sure how to deal with this. I'll post another mail/patch to discuss. diff --git a/tcl/board/balloon3-cpu.cfg b/tcl/board/balloon3-cpu.cfg new file mode 100644 index 0000000..c5aea7b --- /dev/null +++ b/tcl/board/balloon3-cpu.cfg @@ -0,0 +1,16 @@ +# Config for balloon3 board, cpu JTAG port. http://balloonboard.org/ +# The board has separate JTAG ports for cpu and CPLD/FPGA devices +# Chaining is done on IO interfaces if desired. + +# Use our version of pxa config, because stock one has problems +# r1836 onwards would work, but only has one expected ID and wrong +# reset timings +source [find target/pxa270.cfg] + +# The board supports separate reset lines +# Override this in the interface config for parallel dongles +reset_config trst_and_srst separate + +# flash bank <driver> <base> <size> <chip_width> <bus_width> +# 29LV650 64Mbit Flash +flash bank cfi 0x00000000 0x800000 2 2 0 Wookey -- Principal hats: iEndian - Balloonboard - Toby Churchill - Emdebian http://wookware.org/ _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
