On Monday 26 October 2009, Wookey wrote: > Here is my first git patch :-)
Merged, thanks. I did strike the "user our version..." comment, which should not be part of the stock version. We don't use SVN IDs any more either. ;) > --- /dev/null > +++ b/tcl/board/balloon3-cpu.cfg > @@ -0,0 +1,16 @@ > +# Config for balloon3 board, cpu JTAG port. http://balloonboard.org/ > +# The board has separate JTAG ports for cpu and CPLD/FPGA devices > +# Chaining is done on IO interfaces if desired. > + > +# Use our version of pxa config, because stock one has problems > +# r1836 onwards would work, but only has one expected ID and wrong > +# reset timings > +source [find target/pxa270.cfg] > + > +# The board supports separate reset lines > +# Override this in the interface config for parallel dongles > +reset_config trst_and_srst separate > + > +# flash bank <driver> <base> <size> <chip_width> <bus_width> > +# 29LV650 64Mbit Flash > +flash bank cfi 0x00000000 0x800000 2 2 0 > > _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
