By '-c init' did you mean '-c openrd_init'? // Dean Glazeski
On Thu, Nov 19, 2009 at 5:28 PM, :k <[email protected]> wrote: > i tried several versions of openocd, incl. latest from git. serveral > machines (x86 & amd64), as well as different usb cables .. > > I am out of ideas and any hint ist appreciated: > > sudo ./src/openocd -f /usr/local/share/openocd/scripts/board/openrd.cfg > -s /usr/local/share/openocd/scripts/ -c init -c openrd_reflash_uboot > > the "nand probe 0" is always getting an uknown NAND flash device .. > if more debug output is neccessary let me know! > > kind regards, > phaidros > > Open On-Chip Debugger 0.4.0-dev-00465-g9b1f981 (2009-11-19-13:25) > For bug reports, read > http://openocd.berlios.de/doc/doxygen/bugs.html > 3000 kHz > trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain > jtag_nsrst_delay: 200 > jtag_ntrst_delay: 200 > dcc downloads are enabled > Warn : use 'feroceon.cpu' as target identifier, not '0' > Info : clock speed 3000 kHz > Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9, > part: 0x0a02, ver: 0x2) > Info : Embedded ICE version 0 > target state: halted > target halted in ARM state due to debug-request, current mode: Undefined > cpsr: 0x2000009b pc: 0xffffec6c > MMU: disabled, D-Cache: disabled, I-Cache: disabled > 0 0 1 0: 00052078 > Error: unknown NAND flash device found, manufacturer id: 0x00 device id: > 0x00 > probing failed for NAND flash device > Floating point exception > > > > > _______________________________________________ > Openocd-development mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/openocd-development > >
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
