On Thu, 2009-11-19 at 18:04 -0600, Dean Glazeski wrote: > By '-c init' did you mean '-c openrd_init'?
no. actually I don really know that that init does. I just took it from
a working commandline for the sheevaplug.
without it (an openrd_init gets triggered by the openrd_reflash_uboot
itself) I get the following:
Open On-Chip Debugger 0.3.1 (2009-11-19-13:48)
$URL$
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
3000 kHz
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
dcc downloads are enabled
Warn : use 'feroceon.cpu' as target identifier, not '0'
Info : clock speed 3000 kHz
Info : Embedded ICE version 0
Unknown command: halt 0
commenting out that line, following lines are thrown as unknown
commands :/
kind regards,
kloschi
> // Dean Glazeski
>
>
> On Thu, Nov 19, 2009 at 5:28 PM, :k <[email protected]> wrote:
> i tried several versions of openocd, incl. latest from git.
> serveral
> machines (x86 & amd64), as well as different usb cables ..
>
> I am out of ideas and any hint ist appreciated:
>
> sudo ./src/openocd
> -f /usr/local/share/openocd/scripts/board/openrd.cfg
> -s /usr/local/share/openocd/scripts/ -c init -c
> openrd_reflash_uboot
>
> the "nand probe 0" is always getting an uknown NAND flash
> device ..
> if more debug output is neccessary let me know!
>
> kind regards,
> phaidros
>
> Open On-Chip Debugger 0.4.0-dev-00465-g9b1f981
> (2009-11-19-13:25)
> For bug reports, read
> http://openocd.berlios.de/doc/doxygen/bugs.html
> 3000 kHz
> trst_and_srst separate srst_gates_jtag trst_push_pull
> srst_open_drain
> jtag_nsrst_delay: 200
> jtag_ntrst_delay: 200
> dcc downloads are enabled
> Warn : use 'feroceon.cpu' as target identifier, not '0'
> Info : clock speed 3000 kHz
> Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3
> (mfg: 0x1e9,
> part: 0x0a02, ver: 0x2)
> Info : Embedded ICE version 0
> target state: halted
> target halted in ARM state due to debug-request, current mode:
> Undefined
> cpsr: 0x2000009b pc: 0xffffec6c
> MMU: disabled, D-Cache: disabled, I-Cache: disabled
> 0 0 1 0: 00052078
> Error: unknown NAND flash device found, manufacturer id: 0x00
> device id:
> 0x00
> probing failed for NAND flash device
> Floating point exception
>
>
>
>
> _______________________________________________
> Openocd-development mailing list
> [email protected]
> https://lists.berlios.de/mailman/listinfo/openocd-development
>
>
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
