Use register_commands() with a command registration array.
Signed-off-by: Zachary T Welch <[email protected]>
---
src/jtag/ft2232.c | 60 +++++++++++++++++++++++++++++++++++++---------------
1 files changed, 42 insertions(+), 18 deletions(-)
diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c
index e560b22..d202427 100644
--- a/src/jtag/ft2232.c
+++ b/src/jtag/ft2232.c
@@ -3968,27 +3968,51 @@ static void ktlink_blink(void)
buffer_write(high_output);
buffer_write(high_direction);
}
+static const struct command_registration ft2232_command_handlers[] = {
+ {
+ .name = "ft2232_device_desc",
+ .handler = &ft2232_handle_device_desc_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the USB device description of the FTDI
FT2232 device",
+ .usage = "<description>",
+ },
+ {
+ .name = "ft2232_serial",
+ .handler = &ft2232_handle_serial_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the serial number of the FTDI FT2232
device",
+ .usage = "<serial#>",
+ },
+ {
+ .name = "ft2232_layout",
+ .handler = &ft2232_handle_layout_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the layout of the FT2232 GPIO signals used
"
+ "to control output-enables and reset signals",
+ .usage = "<layout>",
+ },
+ {
+ .name = "ft2232_vid_pid",
+ .handler = &ft2232_handle_vid_pid_command,
+ .mode = COMMAND_CONFIG,
+ .help = "the vendor ID and product ID of the FTDI
FT2232 device",
+ .usage = "<vid> <pid> [...]",
+ },
+ {
+ .name = "ft2232_latency",
+ .handler = &ft2232_handle_latency_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the FT2232 latency timer to a new value",
+ .usage = "<vid> <pid> [...]",
+ }
+ };
+
static int ft2232_register_commands(struct command_context* cmd_ctx)
{
- COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_device_desc",
- ft2232_handle_device_desc_command, COMMAND_CONFIG,
- "the USB device description of the FTDI FT2232 device");
- COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_serial",
- ft2232_handle_serial_command, COMMAND_CONFIG,
- "the serial number of the FTDI FT2232 device");
- COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_layout",
- ft2232_handle_layout_command, COMMAND_CONFIG,
- "the layout of the FT2232 GPIO signals used "
- "to control output-enables and reset signals");
- COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_vid_pid",
- ft2232_handle_vid_pid_command, COMMAND_CONFIG,
- "the vendor ID and product ID of the FTDI FT2232
device");
- COMMAND_REGISTER(cmd_ctx, NULL, "ft2232_latency",
- ft2232_handle_latency_command, COMMAND_CONFIG,
- "set the FT2232 latency timer to a new value");
-
- return ERROR_OK;
+ return register_commands(cmd_ctx, NULL,
+ ARRAY_SIZE(ft2232_command_handlers),
+ ft2232_command_handlers);
}
--
1.6.4.4
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
