Hi Andreas Thanks a lot.
My board has Ethernet and LCD interface so that my program is too big to be accommodated into internal SRAM. For this reason, I added external SRAM (1M Bytes) and I'd like to run my program here. JY Koh -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andreas Fritiofson Sent: Tuesday, April 20, 2010 4:28 PM To: [email protected] Cc: [email protected] Subject: Re: [Openocd-development] I'd like to change the workspace from 0x2000000 to 0x6000000 of stm32.cfg On Tue, Apr 20, 2010 at 2:22 AM, JY Koh <[email protected]> wrote: > Hi All, > > > > I have a STM32F103ZE custom board. > > I have been using OpenOCD with Amontec JTAGkey2 for debugging. > > It works fine when I use internal SRAM (64K) as workspace. > > In order to run a little big program I add external SRAM (1M bytes) on FSMC > (CS1) > > So I'd like to use this external SRAM as workspace. > > What should I change in target configuration ? > > I change workspace from 0x2000000 to 0x6000000. It doesn't work. > > Please let me know if there are something to change. > > > > Regards, > > JY Koh > OpenOCD won't set up the FSMC for you so you have to do that somewhere, preferrably in the reset init handler. But I'm not convinced that there are any benefits over having it in internal SRAM. What is the problem? /Andreas _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
